Using the ERA5 and ERA5-Land reanalysis datasets for river water temperature modelling in a data-scarce region

It has become apparent in recent decades that river water temperature can have immediate and lasting impacts on aquatic organisms and their lotic habitat. In rivers that are dammed, there is an opportunity and a responsibility to regulate flows in order to control these temperatures to ensure the survival of the fish and other aquatic life. This paper uses a physically based hydraulic model (HEC-RAS) to run a water temperature component, allowing the thermal model to simulate water temperatures at the same hourly time step as the hydraulic model in a data-sparse region using two meteorological reanalysis datasets (ERA5 and ERA5-Land) as inputs allowing for a full representation of the diurnal cycle. This was achieved by making use of the HEC-RAS controller to automate the calibration and subsequent simulation processes. Results show that these products are able to provide high-quality thermal simulations on a 200 km river system in British Columbia, Canada, obtaining mean absolute errors in validation of 0.66 degrees C and a root mean square error of 0.84 degrees C. Some of the boundary conditions seemed to have little effect on downstream water temperatures. This is due to the measured point of interest being far enough downstream of the dam that a thermal equilibrium is reached well before. Simulations using shorter river reaches confirm that long lakes in the study region contribute to the thermal equilibrium being attained. There also seems to be a limit to the advantage conveyed by increased spatial density of the data, as results indicate a form of skill plateau after a certain input data density is attained.