Effect of initial solidification characteristics on longitudinal crack formation in thin slab caster

Longitudinal surface crack has been one of the serious problems of thin slab casting (TSC). The present study was undertaken to comprehend the characteristics of longitudinal facial crack (LFC) and minimise the same in hot rolled low carbon steel sheets produced through thin slab casting and rolling (TSCR). Macro-structural characteristics of solidified shell has been investigated and correlated with plant observations. The centre and edges of funnel region showed maximum propensity of LFCs. TSC solidification is initiated with fine columnar dendrites which gradually coarsened towards the slab centre. This has been attributed to the characteristics of liquid steel flow instability in the upper mould region. Meniscus flow instability may lead to non-uniform heat transfer besides mould flux entrapment in the solidifying shell. Examination revealed that the mould hot faces ware covered with brass containing voids and cracks. Brass formation was found to be the most prominent around the meniscus of the wide hot face, which gradually faded out towards the mould exit. Tramp elements (zinc and lead) in liquid steel were found to be responsible for harmful brass formation during casting. The present findings were implemented in plant operation to minimise its concentration.