Investigation on Surface Integrity in Hard Turning of AISI 4140 Steel with SPPP-AlTiSiN Coated Carbide Insert under Nano-MQL

The machined surface integrity in the turning of hardened steels is adversely influenced by heat generation and friction which requires pacification of the temperature by the effective cooling-lubrication approach and cutting tool performance. The present research analyzes the surface integrity of hardened AISI 4140 steel during turning with recently developed scalable pulsed power plasma SPPP-AlTiSiN coated carbide tool under nanofluid-assisted minimum quantity lubrication (MQL). Zinc oxide nanoparticles and environmentally friendly radiator coolant are mixed to prepare the nano cutting fluid. This analysis addresses the various aspects of surface integrity concerning surface morphology, machined surface hardness, residual stress and white layer development, and machined surface finish under varying cutting parameters (depth of cut, speed, feed, nose radius). Response surface methodology (RSM) is suggested to predict and to optimize the surface roughness in hard turning. Thereafter, the predictive modelling and optimization results are implemented for economic analysis. According to the findings of the experiments, with a contribution of 58.18%, the feed rate possesses a high impact on the surface finish, followed by the nose radius (12.32%) and speed (0.85%). Consequently, the machined surface quality improved with the increase of the nose radius because of the minimum tool wear and due to the increase of the effective length of the cutting edge. At optimum cutting conditions, the tool life of SPPP-AlTiSiN coated carbide insert is noted as 46 minutes under nanofluid-MQL and consequently, it estimated the overall machining cost per component as Rs.23.12 in Indian currency.