3D Printable Self-Sensing Magnetorheological Elastomer

被引:1
|
作者
Costi, Leone [1 ,2 ]
Georgopoulou, Antonia [2 ]
Mondal, Somashree [2 ]
Iida, Fumiya [1 ]
Clemens, Frank [2 ]
机构
[1] Univ Cambridge, Dept Engn, Bioinspired Robot Lab, Trumpington St, Cambridge CB2 1PZ, England
[2] Swiss Fed Labs Mat Sci & Technol, Empa, Dept Funct Mat, CH-8600 Dubendorf, Switzerland
基金
欧盟地平线“2020”;
关键词
3D printing; magnetoresistive sensors; magnetorheological elastomers; piezoresistive sensors; CARBON-BLACK; MECHANICAL-PROPERTIES; COMPOSITES; STRAIN;
D O I
10.1002/mame.202300294
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Magnetorheological elastomers (MREs) are a category of smart materials composed of a magnetic powder dispersed in an elastomeric matrix. They are characterized by the ability to change their mechanical properties when an external magnetic field is applied, called magnetorheological (MR) effect. When a conductive filler is added to a magnetorheological elastomer, the resulting hybrid filler composite showcases both MR and piezoresistive effects. For such a reason, these composites are referred to as self-sensing magnetorheological elastomers. In this case, the synthesized self-sensing magnetorheological elastomers are based on styrene-based thermoplastic elastomers (TPS), carbonyl iron particles (CIP), and carbon black (CB). The hybrid filler concept using various coated CIP and constant CB content showed that above 25 vol.% CIP the resistivity increased rapidly. This work proposes the first case of a 3D printable self-sensing magnetorheological elastomer and cyclic mechanical compression and tensile mode analysis at high deformation (up to 20% and 10%, respectively). The results showcase a magnetoresistive change of up to 68% and a piezoresistive change of up to 42% and 98% in compression and tension, respectively. In addition, the magnetostriction of the self-sensing samples has been characterized to be 3.6% and 5.6% in the case of CIP 15 and 30 vol.%, respectively. Self-sensing magnetorheological elastomers (MREs) showcase resistive changes induced both by magnetic fields and mechanical loads, on top of magnetic-dependant stiffening. In this work, it is reported the first case of 3D printable self-sensing magnetorheological elastomers. The proposed materials are characterized both as a function of a varying magnetic field and mechanical cyclic load, both in compression and tension.image
引用
收藏
页数:14
相关论文
共 50 条
  • [1] Development of 3D printable self-sensing cementitious composites
    Wang, Lining
    Aslani, Farhad
    Mukherjee, Abhijit
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2022, 337
  • [2] Study on a new self-sensing magnetorheological elastomer bearing
    Li, Rui
    Zhou, Mengjiao
    Wang, Minglian
    Yang, Ping-an
    [J]. AIP ADVANCES, 2018, 8 (06):
  • [3] A standalone tunable vibration absorber with self-sensing magnetorheological elastomer
    Kwon, Haeun
    Song, Yoonkyoung
    Park, Jae-Eun
    Kim, Young-Keun
    [J]. SMART MATERIALS AND STRUCTURES, 2021, 30 (11)
  • [4] A 3D printable and self-healing polydimethylsiloxane elastomer
    Wei, Zi-Xing
    Wang, Hong-Qin
    Li, Cheng-Hui
    [J]. JOURNAL OF POLYMER SCIENCE, 2024, 62 (05) : 859 - 869
  • [5] Modeling and validation of multifield coupled self-sensing characteristics of magnetorheological elastomer for vibration isolators
    Li, Rui
    Gou, Xin
    Zhou, Mengjiao
    Yang, Ping-an
    Li, Penghua
    Shou, Mengjie
    Liao, Changrong
    Wang, Xiaojie
    [J]. MATERIALS & DESIGN, 2022, 217
  • [6] Fabrication of a Self-Healing, 3D Printable, and Reprocessable Biobased Elastomer
    Rahman, Saadman Sakib
    Arshad, Muhammad
    Qureshi, Ahmed
    Ullah, Aman
    [J]. ACS APPLIED MATERIALS & INTERFACES, 2020, 12 (46) : 51927 - 51939
  • [7] Self-sensing of dielectric elastomer actuator
    Jung, Kwangmok
    Kim, Kwang. J.
    Choi, Hyouk Ryeol
    [J]. ELECTROACTIVE POLYMER ACTUATORS AND DEVICES (EAPAD) 2008, 2008, 6927
  • [8] A self-sensing dielectric elastomer actuator
    Jung, Kwangmok
    Kim, Kwang J.
    Choi, Hyouk Ryeol
    [J]. SENSORS AND ACTUATORS A-PHYSICAL, 2008, 143 (02) : 343 - 351
  • [9] Experimental Investigation of an Adaptively Tuned Dynamic Absorber Incorporating Magnetorheological Elastomer with Self-Sensing Property
    T. Komatsuzaki
    T. Inoue
    Y. Iwata
    [J]. Experimental Mechanics, 2016, 56 : 871 - 880
  • [10] Material Characterization of Self-Sensing 3D Printed Parts
    Tansel, Derya Z.
    Yasui, Jennifer A.
    Katko, Benjamin J.
    Marchi, Alexandria N.
    Wachtor, Adam J.
    [J]. SPECIAL TOPICS IN STRUCTURAL DYNAMICS, VOL 6, 2017, : 149 - 158