Modeling and multi-objective optimization of polymer desiccant cooling system

被引：0
|
作者：
Zhang, Hui [1 ]
Qian, Zheng [1 ]
Fang, Zhicong [1 ]
Zhang, Xuemei [1 ]
机构：
[1] Tongji Univ, Sch Mech Engn, Shanghai 201804, Peoples R China
来源：
CASE STUDIES IN THERMAL ENGINEERING | 2024年 / 53卷
关键词：
Air conditioning; Dehumidification; PDWS; NSGA II; PERFORMANCE; ALGORITHM;
D O I：
10.1016/j.csite.2023.103871
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
The polymer desiccant cooling system (PDCS) efficiently reduces energy consumption compared to the vapor compression system (VCS). In this paper, a PDCS integrated heat pump is proposed. Experimental and simulation are used to analyze the performance of the PDCS. The control strategy is optimized with the NSGA II algorithm. A case study in Shanghai illustrates the practical application of the PDCS optimization strategy. The calculation results based on the thermal comfort requirement show the maximum energy consumption of optimized PDCS, routine PDCS, and VCS are 549.9 kW, 597.7 kW, and 1327.7 kW. About 62.7 % and 72.3 % of energy can be saved in routine PDCS and optimized PDCS compared to VCS. Moreover, the maximum moisture removal efficiency of the above scenarios is 10.67 kW/(g center dot s), 11.56 kW/(g center dot s), and 25.42 kW/(g center dot s), separately. Additionally, the maximum coefficient of performance is 0.530, 0.457, and 0.182, respectively.
引用
收藏
页数：16
相关论文
共 50 条
  • [1] Using Multi-objective Evolutionary Algorithms for Optimization of the Cooling System in Polymer Injection Molding
    Fernandes, C.
    Pontes, A. J.
    Viana, J. C.
    Gaspar-Cunha, A.
    [J]. INTERNATIONAL POLYMER PROCESSING, 2012, 27 (02) : 213 - 223
  • [2] Multi-objective optimization of solar assisted absorption cooling system
    Gebreslassie, Berhane H.
    Jimenez, Melanie
    Guillen-Gosalbez, Gonzalo
    Jimenez, Laureano
    Boer, Dieter
    [J]. 20TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, 2010, 28 : 1033 - 1038
  • [3] Modeling and Multi-Objective Optimization of a Miniature Refrigeration System
    Moctezuma-Hernandez, J. A.
    Belman-Flores, J. M.
    Soria-Alcaraz, J. A.
    Espinal-Jimenez, A.
    Rubio-Maya, C.
    [J]. JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 2022, 14 (10)
  • [4] Stochastic modeling and multi-objective optimization for the APECS system
    Subramanyan, Karthik
    Diwekar, Urmila
    Zitney, Stephen E.
    [J]. COMPUTERS & CHEMICAL ENGINEERING, 2011, 35 (12) : 2667 - 2679
  • [5] Dynamic simulation and multi-objective optimization of a solar-assisted desiccant cooling system integrated with ground source renewable energy
    Rayegan, Saeed
    Motaghian, Shahrooz
    Heidarinejad, Ghassem
    Pasdarshahri, Hadi
    Ahmadi, Pouria
    Rosen, Marc A.
    [J]. APPLIED THERMAL ENGINEERING, 2020, 173
  • [6] Modeling, prediction and multi-objective optimization of the coal gasification system
    Li, Ran
    Yang, Zhen
    Duan, Yuanyuan
    [J]. 7TH INTERNATIONAL CONFERENCE ON RENEWABLE ENERGY TECHNOLOGIES (ICRET 2021), 2021, 242
  • [7] Multi-objective optimization of a building free cooling system, based on weather prediction
    Dovrtel, Klemen
    Medved, Saso
    [J]. ENERGY AND BUILDINGS, 2012, 52 : 99 - 106
  • [8] Multi-Objective Optimization Analysis of Motor Cooling System in Articulated Dump Truck
    Zhang Yan
    Shen Yanhua
    Zhang Wenming
    [J]. MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-8, 2012, 383-390 : 4715 - 4720
  • [9] Parametric study and multi-objective optimization of a combined cooling, desalination and power system
    Zhou, Shihe
    Liu, Xinyu
    Feng, Yin
    Bian, Yongning
    Shen, Shengqiang
    [J]. DESALINATION AND WATER TREATMENT, 2021, 217 : 1 - 21
  • [10] Exergy analysis and multi-objective optimization of air cooling system for dry machining
    Libin Zhu
    Huajun Cao
    Haihong Huang
    Xiao Yang
    [J]. The International Journal of Advanced Manufacturing Technology, 2017, 93 : 3175 - 3188
12345