Enhanced Cr (VI) removal with Pb (II) presence by Fe2+-activated persulfate and zero-valent iron system

Combined heavy metals such as chromium (Cr (VI)) and lead (Pb (II)) in natural water have globally posed severe environmental and public health risk. Here the removal of Cr (VI) and Pb (II) mixed pollutants using Fe2+-activated persulfate (PS) with extra zero-valent iron (ZVI), which was not only a supplementary Fe2+ source, but also a high-efficiency absorbent, was investigated. During removal, pivotal factors of initial pollutant concentration, dosages of ZVI and PS, initial pH and temperatures were examined. Interestingly, generating a lot of H+ in the process of Fe (II) activating persulfate were helpful to the corrosion of ZVI over a large range of pH (1-9). Under the optimum condition, removal efficiency of Pb (II) and Cr (VI) have reached 100% and 94.26% respectively. The removal mechanism was suggested as a three-step reaction that the Pb (II) boosted the removal of Cr (VI) by co-precipitated in wastewater, and the Pb (II) and Cr (VI) were adsorbed and subsequently reduced to Pb-0 and Cr3+ as Cr(OH)(3) or Cr3+-Fe3+ hydroxides on ZVI surface. Cr (VI) and Pb (II) adsorption kinetics agreed with the pseudo-second-order reaction rate expression. In addition, we were surprised to found that the contribution effect of chromium and lead co-precipitation for their removal by Fe (II) - PS-ZVI has strong dependence on initial pH and concentration ratio of Cr (VI) and Pb (II). The result indicated that Fe (II)-PS-ZVI system should be a favourable removal technology for Cr (VI) and Pb (II).