Filling your tank with hydrogen

被引:0
|
作者
Szanto, Frank [1 ]
机构
[1] Jacobs, ANZ Rail Syst, AU NSW, 177 Pacific Hwy, North Sydney, NSW 2060, Australia
关键词
hydrogen; locomotive; decarbonisation; ammonia; freight; Safety;
D O I
10.1177/09544097231173739
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
As in many countries, rail electrification in Australia is largely confined to the major cities, and elsewhere most trains are powered by diesel. Electrification is expensive and only viable on lines where traffic density is high. Having adopted the 2050 Zero CO2 emissions target, there is limited time to find alternative power sources or repower all diesels. Hydrogen is one of the most promising alternatives, and a few hydrogen-powered trains are already in service in Europe. However, hydrogen must be stored as a compressed gas or a liquid, and either way the storage volume is much greater than diesel fuel, and handling is difficult. This paper looks at the feasibility of hydrogen for locomotive-hauled freight applications, with a focus on Australia.
引用
收藏
页码:292 / 299
页数:8
相关论文
共 50 条
  • [1] Liquid hydrogen tank and filling systems for vehicles
    Wolf, J
    SIXTH CRYOGENICS 2000, PROCEEDINGS, 2000, (06): : 149 - 157
  • [2] Thermal analysis on filling process in hydrogen tank
    Koshimizu, Takao
    Kasao, Daisaku
    Takata, Yasuyuki
    Monde, Masanori
    Proceedings of the ASME Heat Transfer Division 2005, Vol 1, 2005, 376-1 : 141 - 148
  • [3] Thermal simulations of a hydrogen storage tank during fast filling
    Simonovski, Igor
    Baraldi, Daniele
    Melideo, Daniele
    Acosta-Iborra, Beatriz
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2015, 40 (36) : 12560 - 12571
  • [4] Thermodynamic analysis of hydrogen tank filling. Effects of heat losses and filling rate optimization
    Ruffio, Emmanuel
    Saury, Didier
    Petit, Daniel
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2014, 39 (24) : 12701 - 12714
  • [5] Analysis of Hydrogen Filling of 175 Liter Tank for Large-Sized Hydrogen Vehicle
    Kim, Moo-Sun
    Jeon, Hong-Kyu
    Lee, Kang-Won
    Ryu, Joon-Hyoung
    Choi, Sung-Woong
    APPLIED SCIENCES-BASEL, 2022, 12 (10):
  • [6] Heat transfer analysis for fast filling of on-board hydrogen tank
    Wang, Li
    Ye, Feng
    Xiao, Jinsheng
    Benard, Pierre
    Chahine, Richard
    INNOVATIVE SOLUTIONS FOR ENERGY TRANSITIONS, 2019, 158 : 1910 - 1916
  • [7] Characteristics of heat transfer for hydrogen and wall during filling hydrogen into actual tank at high pressure
    Woodfield, Peter L.
    Takano, Toshio
    Monde, Masanori
    PROCEEDINGS OF THE ASME/JSME THERMAL ENGINEERING SUMMER HEAT TRANSFER CONFERENCE 2007, VOL 1, 2007, : 1069 - 1076
  • [8] NUMERICAL INVESTIGATION OF THE THERMAL BEHAVIOR IN A HYDROGEN TANK DURING FAST FILLING PROCESS
    Takagi, Youhei
    Sugie, Naoya
    Takeda, Kazuhiro
    Okano, Yasunori
    Eguchi, Tooru
    Hirota, Kazuyuki
    PROCEEDINGS OF THE ASME/JSME 8TH THERMAL ENGINEERING JOINT CONFERENCE 2011, VOL 1 PTS A AND B, 2011, : 259 - +
  • [9] Investigation on the changes of pressure and temperature in high pressure filling of hydrogen storage tank
    Li, Ji-Qiang
    Li Li, Ji-Chao
    Park, Kyoungwoo
    Kwon, Jeong-Tae
    CASE STUDIES IN THERMAL ENGINEERING, 2022, 37
  • [10] Hydrogen tank first filling experiments at the JRC-IET GasTeF facility
    Cebolla, R. Ortiz
    Acosta, B.
    Moretto, P.
    Frischauf, N.
    Harskamp, F.
    Bonato, C.
    Baraldi, D.
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2014, 39 (11) : 6261 - 6267