Theoretical analysis of R1234yf and R1234yf/R125 mixture as replacement of R134a in vapor compression system

被引:1
|
作者
Lin, Yongmei [1 ]
Meng, Zhaofeng [2 ]
Huo, Ziheng [2 ]
Ding, Chuangchuang [2 ]
Wang, Song [2 ]
Wang, Longji [2 ]
机构
[1] China Southwest Geotech Invest & Design Inst Co Lt, Chengdu 610066, Sichuan, Peoples R China
[2] Zhongyuan Univ Technol, Sch Energy & Environm, Zhengzhou 451100, Henan, Peoples R China
关键词
R1234yf; R125; R134a; GWP; mixed refrigerants; PERFORMANCE;
D O I
10.1093/ijlct/ctae017
中图分类号
O414.1 [热力学];
学科分类号
摘要
In this article, in order to reduce the climate hazards caused by global warming, a new environmentally friendly mixed refrigerant, R1234yf/R125 (with a mass ratio of 95:5), is introduced. Alongside R1234yf, the article conducts theoretical research to assess the feasibility of substituting R134a in vapor compression systems. The results show that coefficient of performance (COP) and compressor discharge temperatures of R1234yf and R1234yf/R125 are similar to 5.5% and 11 degrees C lower than those of R134a, respectively. The volumetric cooling capacity of R1234yf is on average 8% smaller than that of R134a. The volumetric cooling capacity of R1234yf/R125 is similar to that of R134a, making it highly suitable for direct charging. R1234yf/R125 is basically nonflammable, with a minimal temperature glide, ozone depletion potential of 0 and a global warming potential of 144. It adheres to F-gas regulations and serves as an outstanding replacement for R134a.
引用
收藏
页码:490 / 496
页数:7
相关论文
共 50 条
  • [1] Experimental analysis of R1234yf as a drop-in replacement for R134a in a vapor compression system
    Navarro-Esbri, J.
    Mendoza-Miranda, J. M.
    Mota-Babiloni, A.
    Barragan-Cervera, A.
    Belman-Flores, J. M.
    INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2013, 36 (03): : 870 - 880
  • [2] Energy Analysis of R1234yf/R134a as Replacement of R134a in a Domestic Refrigerator
    Raveendran, P. Saji
    Murugan, P. C.
    Darwin, T.
    Glivin, Godwin
    Dwivedi, Gaurav
    ADVANCEMENT IN MATERIALS, MANUFACTURING AND ENERGY ENGINEERING, VOL. II, ICAMME 2021, 2022, : 495 - 502
  • [3] Performance improvement strategies of R1234yf in vapor compression refrigeration system as a R134a replacement: A review
    Sharif, M. Z.
    Azmi, W. H.
    Ghazali, M. F.
    Samykano, M.
    Ali, Hafiz Muhammad
    JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS, 2023, 148
  • [4] Analysis the characteristics of R1234yf, R1234ze, R134a on reefer container
    Ding, Defeng
    Zhu, Zhenxiang
    Chen, Wu
    Liu, Shijie
    Zheng, Chaoyu
    2019 5TH INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY RESOURCES AND ENVIRONMENT ENGINEERING (ICAESEE 2019), 2020, 446
  • [5] EXPERIMENTAL STUDY ON R1234yf/R134a MIXTURE (R513a) AS R134a REPLACEMENT IN HEAT PIPES
    Kumar, Vivek
    Kabir, Raihanul
    Shannon, Zachary
    Waghmare, Prashant R.
    Flynn, M. R.
    JOURNAL OF ENHANCED HEAT TRANSFER, 2025, 32 (04) : 1 - 23
  • [6] Vapor-liquid equilibrium measurements for binary mixtures of R1234yf with R32, R125, and R134a
    Kamiaka, Takumi
    Dang, Chaobin
    Hihara, Eiji
    INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2013, 36 (03): : 965 - 971
  • [7] FEASIBILITY OF R1234yf/R13I1 MIXTURE REFRIGERANT AS REPLACEMENT OF R134a REFRIGERANT IN VAPOR COMPRESSION SYSTEM
    Yang, Weibing
    Meng, Zhaofeng
    Huo, Ziheng
    Ding, Chuangchuang
    THERMAL SCIENCE, 2024, 28 (3A): : 2083 - 2092
  • [8] Experimental study on R1234yf/R134a mixture (R513A) as R134a replacement in a domestic refrigerator
    Yang, Meng
    Zhang, Hua
    Meng, Zhaofeng
    Qin, Yanbin
    APPLIED THERMAL ENGINEERING, 2019, 146 : 540 - 547
  • [9] Performance of Automotive Air Conditioning System with R134a and R1234yf
    Kuwar, Yogendra Vasantrao
    Narasimham, G. S. V. L.
    INTERNATIONAL JOURNAL OF AIR-CONDITIONING AND REFRIGERATION, 2020, 28 (02)
  • [10] Computational energy and exergy analysis of R134a, R1234yf, R1234ze and their mixtures in vapour compression system
    Gaurav
    Kumar, Raj
    AIN SHAMS ENGINEERING JOURNAL, 2018, 9 (04) : 3229 - 3237