A non-destructive approach to estimate buttress volume using 3D point cloud data

被引:3
|
作者
Han, Tao [1 ]
Raumonen, Pasi [2 ]
Sanchez-Azofeifa, G. Arturo [1 ]
机构
[1] Univ Alberta, Ctr Earth Observat Sci, Dept Earth & Atmospher Sci, Edmonton, AB T6G 2E3, Canada
[2] Tampere Univ, Comp Sci, Korkeakoulunkatu 1, Tampere 33720, Finland
基金
加拿大自然科学与工程研究理事会; 芬兰科学院;
关键词
Volume; Buttress; Alpha shape; Triangulation; Point clouds; Allometric models; LASER-SCANNING DATA; ABOVEGROUND BIOMASS; RAIN-FOREST; STEM VOLUME; TREES; MODELS;
D O I
10.1016/j.ecoinf.2023.102218
中图分类号
Q14 [生态学(生物生态学)];
学科分类号
071012 ; 0713 ;
摘要
Buttressed trees provide mechanical support for themselves and offer essential ecological functions, such as nutrient acquisition, while being one of the largest sources of volume or biomass estimation variation in tropical forests. In this study, we collected 51 buttressed trees from (33) Democratic Republic of Congo, (12) Indonesia, and (6) Costa Rica, including (48) point clouds, and (3) destructive measurement. Specifically, we compared the performance of the Alpha Shape Algorithm (ASA) and the Slice Triangulation (ST) method on buttress volume estimation based on 30 point clouds with two species. Six point clouds from Costa Rica were used to validate the 3D surface reconstruction method. Meanwhile, we developed three allometric models based on 36 point clouds: a diameter above the buttress-based (DAB, 39 to 203 cm) model, a diameter computed from the non-convex area (Darea130) model, and the convex hull perimeter (Dconvex130) of the breast height model. The developed models were validated with independent data, including (6) point clouds and (3) destructive measurements, to highlight the broader contextualization and application of these methods. Volume estimated by the ASA and ST showed a high agreement with the reference volume acquired using the Smalian formula (relative RMSE of 0.07 and 0.11, respectively, regardless of species effect). ASA was also robust when modeling trees with more and shallower horizontal buttresses. Darea130 was the most accurate predictor to estimate buttress volume, with a lower Akaike information criterion (-66.25) than DAB (-59.55) and Dconvex130 (30.56); however, DAB and Darea130 (relative RMSE of 0.21 and 0.23, respectively) showed similar performance when validated with independent datasets. Our results indicate that the ASA approach performs better than both the ST and allometric models used in this study. Furthermore, the ASA method can help correct the bias in the present and past estimates of volume and biomass of large trees, which are foundational components for understanding biomass allocation and dynamics in tropical forests contemporary fields.
引用
收藏
页数:10
相关论文
共 50 条
  • [1] Non-destructive measurement of rice leaf dimension in 3D point cloud
    Rattanasuwan, P.
    Kumazawa, I
    Kasetkasem, T.
    2020 3RD INTERNATIONAL CONFERENCE ON GREEN ENERGY AND ENVIRONMENT ENGINEERING, 2021, 633
  • [2] 3D printed drug products: Non-destructive dose verification using a rapid point-and-shoot approach
    Trenfield, Sarah J.
    Goyanes, Alvaro
    Telford, Richard
    Wilsdon, David
    Rowland, Martin
    Gaisford, Simon
    Basit, Abdul W.
    INTERNATIONAL JOURNAL OF PHARMACEUTICS, 2018, 549 (1-2) : 283 - 292
  • [3] Harnessing non-destructive 3D pathology
    Liu, Jonathan T. C.
    Glaser, Adam K.
    Bera, Kaustav
    True, Lawrence D.
    Reder, Nicholas P.
    Eliceiri, Kevin W.
    Madabhushi, Anant
    NATURE BIOMEDICAL ENGINEERING, 2021, 5 (03) : 203 - 218
  • [4] Harnessing non-destructive 3D pathology
    Jonathan T. C. Liu
    Adam K. Glaser
    Kaustav Bera
    Lawrence D. True
    Nicholas P. Reder
    Kevin W. Eliceiri
    Anant Madabhushi
    Nature Biomedical Engineering, 2021, 5 : 203 - 218
  • [5] Non-Destructive 3D Measurement of Microchannels
    Heikkinen, Ville
    Nolvi, Anton
    Kassamakov, Ivan
    Grigoras, Kestutis
    Franssila, Sami
    Haeggstrom, Edward
    INSTRUMENTATION, METROLOGY, AND STANDARDS FOR NANOMANUFACTURING, OPTICS, AND SEMICONDUCTORS VI, 2012, 8466
  • [6] 3D Terahertz Imaging for Non-Destructive Testing
    Loeffler, Torsten
    Quast, Holger
    TM-TECHNISCHES MESSEN, 2010, 77 (06) : 349 - 352
  • [7] NON-DESTRUCTIVE ANALYSIS OF FIBER PROPERTIES USING 3D X-RAY TOMOGRAPHIC DATA
    Miettinen, A.
    Kataja, M.
    COMPOSITE MATERIALS FOR STRUCTURAL PERFORMANCE: TOWARDS HIGHER LIMITS, 2011, : 385 - 392
  • [8] Finding buried metallic pipes using a non-destructive approach based on 3D time-domain induced polarization data
    Shao, Zhenlu
    Revil, Andre
    Mao, Deqiang
    Wang, Deming
    JOURNAL OF APPLIED GEOPHYSICS, 2018, 151 : 234 - 245
  • [9] Non-destructive readout method for 3D magnetic memory
    Jang, Heechan
    Ye, Feifan
    Shiota, Yoichi
    Karube, Shutaro
    Hisatomi, Ryusuke
    Ono, Teruo
    Journal of the Magnetics Society of Japan, 49 (01): : 9 - 12
  • [10] 3D thermography in non-destructive testing of composite structures
    Hellstein, Piotr
    Szwedo, Mariusz
    MEASUREMENT SCIENCE AND TECHNOLOGY, 2016, 27 (12)