Flow behavior of Ti-46.2Al-2.5V-1.0Cr-0.3Ni alloy in secondary hot deformation

被引：1
|
作者：
司家勇
韩鹏彪
昌霞
张继
机构：
[1] High Temperature Material Research Division Central Iron and Steel Research Institute
[2] Beijing 100081
[3] China
来源：
Transactions of Nonferrous Metals Society of China | 2006年 / S3期
关键词：
gamma TiAl; flow behavior; secondary hot deformation;
D O I：
暂无
中图分类号：
TG306 [压力加工工艺];
学科分类号：
080201 ; 080503 ;
摘要：
The flow behavior of already forged Ti-46.2Al-2.5V-1.0Cr-0.3Ni alloy was investigated by the isothermal compression experiments. The direction of secondary hot deformation was taken to be vertical to the former forging axis. And the deformation activation energy was calculated. Specimens have three kinds of starting microstructures, i.e. as-forged, relief annealed and duplex. The true strain—stress curves show that the duplex microstructure has the lowest flow resistance, better steady-state flow behavior compared with other two microstructures. It is found that obtaining duplex microstructure makes the work hardening rate and the strain rate sensitivity increase. The duplex microstructure alloy has the lowest value.
引用
收藏
页码：2091 / 2095
页数：5
相关论文
共 50 条
  • [1] Flow behavior of Ti-46.2Al-2.5V-1.0Cr-0.3Ni alloy in secondary hot deformation
    Si Jia-yong
    Han Peng-biao
    Chang Xia
    Zhang Ji
    [J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2006, 16 : S2091 - S2095
  • [2] Microstructure preparation and hot-deformation of Ti-46.2Al-2.0V-1.0Cr-0.5Ni alloy
    Zhang, J
    Zhang, ZH
    Su, X
    Zou, DX
    Zhong, ZY
    Li, CH
    [J]. INTERMETALLICS, 2000, 8 (04) : 321 - 326
  • [3] Design for Isothermal Forging of Ti-46.5Al-2.5V-1.0Cr-0.3Ni Alloy
    SI Jia-yong1
    2.High Temperature Material Research Division
    [J]. Journal of Iron and Steel Research(International), 2010, 17 (08) : 67 - 73
  • [4] Study on hot deformation behavior and processing map of a Ti-47.5Al-2.5V-1.0Cr-0.2Zr alloy with a fully lamellar microstructure
    Lin, Xuejian
    Huang, Hongjun
    Yuan, Xiaoguang
    Wang, Yinxiao
    Zheng, Bowen
    Zuo, Xiaojiao
    Zhou, Ge
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 901
  • [5] Study on hot deformation behavior and processing map of a Ti-47.5Al-2.5V-1.0Cr-0.2Zr alloy with a fully lamellar microstructure
    Lin, Xuejian
    Huang, Hongjun
    Yuan, Xiaoguang
    Wang, Yinxiao
    Zheng, Bowen
    Zuo, Xiaojiao
    Zhou, Ge
    [J]. Journal of Alloys and Compounds, 2022, 901
  • [6] The hot deformation behavior and processing map of Ti-47.5Al-Cr-V alloy
    Du, Zhihao
    Jiang, Shaosong
    Zhang, Kaifeng
    [J]. MATERIALS & DESIGN, 2015, 86 : 464 - 473
  • [7] Ti-46Al-2.5V-1.0Cr-0.3Ni合金热处理工艺研究
    静永娟
    高帆
    王新英
    张继
    [J]. 热加工工艺, 2011, 40 (04) : 142 - 144
  • [8] Ti-46.5Al-2.5V-1.0Cr-0.3Ni合金开坯过程的组织预报模型
    司家勇
    高帆
    张继
    [J]. 锻压技术, 2011, 36 (05) : 137 - 143
  • [9] Ti-46.5Al-2.5V-1.0Cr-0.3Ni合金高温锻造本构模型研究
    司家勇
    韩鹏彪
    张继
    [J]. 锻压技术, 2009, 34 (05) : 121 - 125
  • [10] Ti-46.5Al-2.5V-1.0Cr-0.3Ni合金高温变形动态再结晶行为
    司家勇
    韩鹏彪
    昌霞
    张继
    [J]. 钢铁研究学报, 2009, 21 (05) : 46 - 50
12345