3-D discontinuum numerical modeling of subsidence incorporating ore extraction and backfilling operations in an underground iron mine in China

被引:0
|
作者
Huang Gang [1 ,2 ,3 ]
Kulatilake Pinnaduwa H.S.W. [3 ]
Shreedharan Srisharan [3 ]
Cai Sijing [2 ]
Song Hongqing [2 ]
机构
[1] School of Resources and Environmental Engineering, Wuhan University of Technology
[2] School of Civil and Environmental Engineering, University of Science and Technology,Beijing
[3] Rock Mass Modeling and Computational Rock Mechanics Laboratories, University of Arizona
基金
中国国家自然科学基金;
关键词
Underground iron mine; Discontinuum numerical modeling; Open stoping; Backfill; Subsidence;
D O I
暂无
中图分类号
TD861.1 [];
学科分类号
081901 ;
摘要
An underground iron mine in China has been used as a case-study to research the subsidence due to ore extraction and backfilling during open stoping operations. A 3-D discontinuum numerical model was built incorporating geologic complexities including faults and interfaces between different lithologies,and the stoping and backfilling sequence adopted from the mine plans. The stoping was carried out in two vertically stacked horizontal layers, with a total of 16 stopes. Large displacements of up to 50 cm were observed along the roof of the stopes, and a maximum surface subsidence of 22.5 cm was observed.Backfilling was found to eliminate subsequent displacements and subsidence. The extraction of the upper orebody was found to influence displacements in the lower orebody. Finally, a subsidence profile was constructed to show the subsidence at all locations along the length of the surface and region of influence on the surface.
引用
收藏
页码:191 / 201
页数:11
相关论文
共 9 条
  • [1] 3-D discontinuum numerical modeling of subsidence incorporating ore extraction and backfilling operations in an underground iron mine in China
    Huang Gang
    Pinnaduwa, Kulatilake H. S. W.
    Srisharan, Shreedharan
    Cai Sijing
    Song Hongqing
    INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY, 2017, 27 (02) : 191 - 201
  • [2] 3-D MODELING OF UNDERGROUND MINE STRUCTURES WITH BACKFILL
    ZHANG, L
    MITRI, HS
    CIM BULLETIN, 1992, 85 (962): : 89 - 94
  • [3] Prediction of Subsidence Parameters & 3-D Analysis at Balaghat Underground Manganese Mine of MOIL Limited, India
    Manekar, G. G.
    Shome, D.
    Chaudhari, M. P.
    ISRM EUROPEAN ROCK MECHANICS SYMPOSIUM EUROCK 2017, 2017, 191 : 1075 - 1086
  • [4] 3-D modeling of iron ore deposit in Chadormalu area in the Central Iran
    Pirouz, Mortaza
    Ghazipour, Neda
    Monsef, Reza
    Emami, Mohamad Hashem
    GEOCHIMICA ET COSMOCHIMICA ACTA, 2007, 71 (15) : A794 - A794
  • [5] 3-D numerical simulation and dispersion analysis of in-seam wave in underground coal mine
    Ji Guang-Zhong
    Cheng Jian-Yuan
    Zhu Pei-Min
    Li Hui
    CHINESE JOURNAL OF GEOPHYSICS-CHINESE EDITION, 2012, 55 (02): : 645 - 654
  • [6] 3-D numerical modeling and circuit extraction techniques for the analysis of unshielded twisted pairs
    Caniggia, S.
    Maffucci, A.
    Maradei, F.
    Villone, F.
    Zamboni, W.
    IEEE TRANSACTIONS ON MAGNETICS, 2007, 43 (04) : 1357 - 1360
  • [7] Design of barrier pillars in Tabas underground Coal Mine (Iran) using 3D numerical modeling
    Goodarzi, M.
    Rassouli, F. S.
    Yavari, M.
    ROCK STRESS AND EARTHQUAKES, 2010, : 601 - 605
  • [8] Integration of field characterisation, mine production and InSAR monitoring data to constrain and calibrate 3-D numerical modelling of block caving-induced subsidence
    Woo, Kyu-Seok
    Eberhardt, Erik
    Rabus, Bernhard
    Stead, Doug
    Vyazmensky, Alex
    INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2012, 53 : 166 - 178
  • [9] Interactive 3D forward modeling of total field surface and three-component borehole magnetic data for the Daye iron-ore deposit (Central China)
    Yang Yushan
    Li Yuanyuan
    Liu Tianyou
    Zhan Yinglin
    Feng Jie
    JOURNAL OF APPLIED GEOPHYSICS, 2011, 75 (02) : 254 - 263