Preparation and Long Persistence Red Luminescence of M (0.2)Ca0.8TiO3∶Pr 3+ (M=Mg2+, Sr2+, Ba2+, Zn 2+

M 0.2Ca 0.8TiO 3∶Pr 3+(M=Mg 2+, Sr 2+, Ba 2+, Zn 2+) long persistence red phosphors were prepared by solid state reaction. The influence of the partially replacing Ca 2+ in CaTiO 3 with Mg 2+, Sr 2+, Ba 2+, Zn 2+ on the excitation spectra, the emission spectra and the long persistence properties were studied. The results suggest that certain quantity of Mg 2+, Sr 2+, Ba 2+, Zn 2+ which partially replace Ca 2+ can enhance the luminescent intensity and prolong the afterglow persistence of the samples. The intensity of Mg 0.2Ca 0.8TiO 3∶Pr 3+ is above all of the samples. Take Mg 0.2Ca 0.8TiO 3∶Pr 3+ as the basic sample, the influence of Pr 3+ concentrations (C(Pr 3+)) on the long afterglow properties were also studied. The results suggest that when the C(Pr 3+) is 0.10% (mol fraction) the intensity of the sample is the highest. The excitation spectra of all these samples show broad band spectra ranging from 300～500 nm peaking at about 342 nm. The emission spectra also exhibit a broad band peaking at 613 nm (CaTiO 3∶Pr 3+ is 612 nm). XRD research indicates that the crystalline phases change due to the replacement of divalent metal ions.The research on the thermoluminescence spectra of Mg 0.2Ca 0.8TiO 3∶Pr 3+ indicates that the peak is at 107.35 ℃ and the depth of the trap energy is about 0 852 eV.