Study on deposition of Al2O3 films by plasma-assisted atomic layer with different plasma sources

In this paper,Al2O3thin films are deposited on a hydrogen-terminated Si substrate by using two home-built electron cyclotron resonance(ECR) and magnetic field enhanced radio frequency plasma-assisted atomic layer deposition(PA-ALD) devices with Al(CH3)3(trimethylaluminum,TMA) and oxygen plasma used as precursor and oxidant,respectively.The thickness,chemical composition,surface morphology and group reactions are characterized by in situ spectroscopic ellipsometer,x-ray photoelectric spectroscopy,atomic force microscopy,scanning electron microscopy,a high-resolution transmission electron microscope and in situ mass spectrometry(MS),respectively.We obtain that both ECR PA-ALD and the magnetic field enhanced PAALD can deposit thin films with high density,high purity,and uniformity at a high deposition rate.MS analysis reveals that the Al2O3deposition reactions are not simple reactions between TMA and oxygen plasma to produce alumina,water and carbon dioxide.In fact,acetylene,carbon monoxide and some other by-products also appear in the exhaustion gas.In addition,the presence of bias voltage has a certain effect on the deposition rate and surface morphology of films,which may be attributed to the presence of bias voltage controlling the plasma energy and density.We conclude that both plasma sources have a different deposition mechanism,which is much more complicated than expected.