user

Analysis on Interface Shear Stress of Thermally InsulatedOcean Pipelines Under Installation

被引：0
|
作者：
闫澍旺 [1 ]
田英辉 [1 ]
刘润 [1 ]
王章岭 [2 ]
王金英 [3 ]
机构：
[1] School of Civil Engineering, Tianjin University
[2] China Ocean Oil Engineering Corporation Ltd.  3. China National Ocean Oil Corporation Ltd.
来源：
China Ocean Engineering | 2006年 / 02期
关键词：
thermally insulated pipelines; shear stress; installation; binding force;
D O I：
暂无
中图分类号：
P756.2 [水下管道];
学科分类号：
0814 ; 081505 ; 0824 ; 082401 ;
摘要：
It has been proved that the thermally insulated ocean pipeline has advantages over the conventional pipe-in-pipe pipeline. The risk of using the thermally insulated pipeline is that the exterior layers covering the steel pipe may be pulled off if the shear stress on the interface induced by the pullout force from the tensioner is greater than the binding force between two neighboring layers during installation. This paper develops a procedure to calculate the shear stress on the interface. The binding force between two neighboring layers can be determined with full scale model tests. The safety of the thermally insulated pipe under installation can then be checked by comparison of the interface shear stress with the binding force.
引用
收藏
页码：315 / 323
页数：9
相关论文
共 50 条
  • [1] Analysis on interface shear stress of thermally insulated ocean pipelines under installation
    Yan, SW
    Tian, YH
    Liu, R
    Wang, ZL
    Wang, JY
    [J]. CHINA OCEAN ENGINEERING, 2006, 20 (02) : 315 - 323
  • [2] Installation loading and stress analysis involved with pipelines installed by horizontal directional drilling
    Huey, DP
    Hair, JD
    McLeod, KB
    [J]. INTERNATIONAL NO-DIG '96 - INTERNATIONAL CONFERENCE AND EXHIBITION OF TRENCHLESS TECHNOLOGY: TRENCHLESS SOUNDS THE RIGHT NOTE, 1996, : 36 - 60
  • [3] Analysis on the interface maximum shear stress of cermet cladding part under wear condition
    College of Mechanical and Electrical Engineering, Shandong University of Science and Technology, Qingdao 266510, China
    不详
    不详
    [J]. J. Mech. Strength, 2008, 3 (428-432):
  • [4] The behavior of polymer-bentonite interface under shear stress
    Li, Manjun
    Fang, Hongyuan
    Du, Mingrui
    Zhang, Chao
    Su, Zhan
    Wang, Fuming
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2020, 248 (248)
  • [5] Electrical probing of a steel rough interface under shear stress
    Foy, N.
    Chevallier, E.
    Zerari, H.
    Zehouani, D.
    Favry, D.
    [J]. TRIBOLOGY INTERNATIONAL, 2020, 151
  • [6] Stress analysis of full-length grouted bolt under shear deformation of anchor interface
    Zheng-de Zhu
    Xiao-yun Shu
    Zhe Li
    Hong-ming Tian
    Yun Tian
    [J]. Journal of Mountain Science, 2022, 19 : 3286 - 3301
  • [7] Stress analysis of full-length grouted bolt under shear deformation of anchor interface
    ZHU Zheng-de
    SHU Xiao-yun
    LI Zhe
    TIAN Hong-ming
    TIAN Yun
    [J]. Journal of Mountain Science, 2022, 19 (11) : 3286 - 3301
  • [8] A simplified analysis of interface failure under compressive normal stress and monotonic or cyclic shear loading
    Mróz, Z
    Bialas, M
    [J]. INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS, 2005, 29 (04) : 337 - 368
  • [9] Interface Shear Stress Analysis of Bond FRP Tendon Anchorage under Different Boundary Conditions
    Li, Fei
    Zhao, Qi Lin
    Chen, Hao Sen
    Wang, Jing Quan
    [J]. COMPOSITE INTERFACES, 2011, 18 (02) : 91 - 106
  • [10] Stress analysis of full-length grouted bolt under shear deformation of anchor interface
    Zhu Zheng-de
    Shu Xiao-yun
    Li Zhe
    Tian Hong-ming
    Tian Yun
    [J]. JOURNAL OF MOUNTAIN SCIENCE, 2022, 19 (11) : 3286 - 3301
12345