Thermal analysis of a constructal T-shaped porous fin with simultaneous heat and mass transfer

被引：0

作者：

Saheera Azmi Hazarika ^{[1
]}

Tuhin Deshamukhya ^{[1
]}

Dipankar Bhanja ^{[1
]}

Sujit Nath ^{[1
]}

机构：

[1] Department of Mechanical Engineering, National Institute of Technology

来源：

ChineseJournalofChemicalEngineering | 2017年 / 25卷 / 09期

关键词：

Constructal; Porous; Mass transfer; Analytical; Optimization; Differential Transform Method;

D O I：

暂无

中图分类号：

TQ021 [基础理论];

学科分类号：

摘要：

The present work establishes an analytical model for computing the temperature distribution, fin efficiency and optimum design parameters of a constructal T-shaped porous fin operating in fully wet condition. For more practical results, this study considers a cubic polynomial relationship between the humidity ratio of saturated air and the corresponding fin surface temperature. The temperature distribution has been determined by solving the highly non-linear governing equations using a semi-analytical transformation technique called Differential Transform Method. A comparison of the results with that of a numerical model shows that this transformation method is a very efficient and convenient tool for solution of non-linear problems. The effects of various geometric, thermo-physical and psychometric parameters on the temperature distribution, fin efficiency and optimum design condition have been investigated. Also, a comparison has been presented between solid and porous fins and the results point out that by selecting an appropriate value of porosity, the heat transfer rate can be increased than the corresponding solid fin.

引用

页码：1121 / 1136

页数：16

共 50 条

[1] Thermal analysis of a constructal T-shaped porous fin with simultaneous heat and mass transfer
Hazarika, Saheera Azmi
Deshamukhya, Tuhin
Bhanja, Dipankar
Nath, Sujit
CHINESE JOURNAL OF CHEMICAL ENGINEERING, 2017, 25 (09) : 1121 - 1136
[2] Thermal analysis of a constructal T-shaped porous fin with radiation effects
Bhanja, Dipankar
Kundu, Balaram
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2011, 34 (06): : 1483 - 1496
[3] Heat Transfer and Fin Performance Comparison between Constructal T-shaped Porous and Solid Fin
Bhanja, D.
Kundu, B.
INTERNATIONAL CONFERENCE ON MODELING, OPTIMIZATION, AND COMPUTING, 2010, 1298 : 122 - +
[4] Geometric optimization and performance study of a constructal T-shaped fin under simultaneous heat and mass transfer
Hazarika, Saheera Azmi
Bhanja, Dipankar
Nath, Sujit
Kundu, Balaram
APPLIED THERMAL ENGINEERING, 2016, 109 : 162 - 174
[5] Analytical solution to predict performance and optimum design parameters of a constructal T-shaped fin with simultaneous heat and mass transfer
Hazarika, Saheera Azmi
Bhanja, Dipankar
Nath, Sujit
Kundu, Balaram
ENERGY, 2015, 84 : 303 - 316
[6] Performance and optimization analysis of a constructal T-shaped fin subject to variable thermal conductivity and convective heat transfer coefficient
Kundu, B.
Bhanja, D.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2010, 53 (1-3) : 254 - 267
[7] Analytical Study on the Thermal Performance of a Partially Wet Constructal T-shaped Fin
Hazarika, Saheera Azmi
Zeeshan, Mohd
Bhanja, Dipankar
Nath, Sujit
INTERNATIONAL CONFERENCE ON FUNCTIONAL MATERIALS, CHARACTERIZATION, SOLID STATE PHYSICS, POWER, THERMAL AND COMBUSTION ENERGY (FCSPTC-2017), 2017, 1859
[8] Radiation effect on optimum design analysis of a constructal T-shaped fin with variable thermal conductivity
Dipankar Bhanja
Balaram Kundu
Heat and Mass Transfer, 2012, 48 : 109 - 122
[9] Radiation effect on optimum design analysis of a constructal T-shaped fin with variable thermal conductivity
Bhanja, Dipankar
Kundu, Balaram
HEAT AND MASS TRANSFER, 2012, 48 (01) : 109 - 122
[10] Convective analysis of constructal T-shaped fins
G. Lorenzini
M. Medici
L. A. O. Rocha
Journal of Engineering Thermophysics, 2014, 23 : 98 - 104

← 1 2 3 4 5 →