Development of a Calibration and Monitoring System for GD-1 High Pressure Common Rail Diesel Engine

被引：1

作者：

王俊席

杨林

冯静

冒晓建

卓斌

机构：

[1] School of Mechanical & Power Eng. Shanghai Jiaotong Univ.

[2] School of Mechanical & Power Eng.

[3] Shanghai 200030

[4] China

来源：

Journal of Shanghai Jiaotong University(Science) | 2004年 / 02期

关键词：

diesel engine; calibrating and monitoring system; CAN calibration protocol; online calibration;

D O I：

暂无

中图分类号：

TK42 [柴油机];

学科分类号：

080703 ;

摘要：

Based on CAN calibration protocol, a new calibration and monitoring system was developed for the GD-1 high pressure common rail diesel engine. CAN driver block, monitoring program and calibration program for this system were designed respectively. The inquiry mode was used in the monitoring program and the interrupt mode was used in calibration program. The calibration program was designed in structural programming model. This system provides a reliable, accurate and quick CAN bus between ECU and PC, with baud rate up to 500Kbit/s. The implementation of the compatible and universal CAN calibration protocol makes it easy to displace the system and its function modules. It also provides friendly, compatible and flexible calibration interface, and the functions of online calibration and real-time monitoring. This system was successfully used in a GD-1 high pressure common rail diesel engine and the engine performance and exhaust emissions were significantly improved.

引用

页码：45 / 49

页数：5

共 50 条

[1] Development of hardware for GD-1 high pressure common rail vehicle diesel engine
Mao, Xiao-Jian
Xiao, Wen-Yong
Chang, Jiu-Peng
Yang, Lin
Zhuo, Bin
[J]. Neiranji Xuebao/Transactions of CSICE (Chinese Society for Internal Combustion Engines), 2002, 20 (05):
[2] Injection pressure control of GD-1 electronically controlled high-pressure common rail fuel injection system
Xiao, Wen-Yong
Yang, Lin
Liang, Feng
[J]. Neiranji Xuebao/Transactions of CSICE (Chinese Society for Internal Combustion Engines), 2004, 22 (03): : 235 - 240
[3] Study on Simulink for pressure control strategy for GD-1 diesel engine
Shanghai Jiao Tong University, China
[J]. Nongye Jixie Xuebao, 2007, 1 (56-59+79):
[4] Pressure controll of high pressure common rail diesel engine
Wang, Hong-Rong
Zhang, You-Tong
Wang, Jun
Liu, Lian-Da
[J]. Beijing Ligong Daxue Xuebao/Transaction of Beijing Institute of Technology, 2008, 28 (09): : 778 - 781
[5] Development of a common rail system for a HSDI diesel engine
Hokazono, Y
Konomi, T
Fujimura, T
Miyata, Y
[J]. FUEL INJECTION SYSTEMS, 1999, 1999 (17): : 71 - 81
[6] Development of Engine Management System for a Common-Rail Diesel Engine with Cylinder Pressure Measurement
Chiang, Chia-Jui
Chou, Chih-Cheng
Lin, Ying-Wei
Tsai, Tzung-Hua
Ku, Yong-Yuan
[J]. 2014 IEEE 4TH ANNUAL INTERNATIONAL CONFERENCE ON CYBER TECHNOLOGY IN AUTOMATION, CONTROL, AND INTELLIGENT SYSTEMS (CYBER), 2014, : 371 - 376
[7] Calculation and analysis of combustion and emission of a diesel engine with high pressure common rail system
[J]. Shao, L.-M. (slmzf1226@sina.com), 2005, Chinese Society for Internal Combustion Engines (26):
[8] Match of High Pressure Common Rail System in Diesel Engine by Knowledge based Engineering
Wang, Jun
Zhang, Youtong
Xiong, Qinghui
Ding, Xiaoliang
[J]. 2009 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, VOLS 1-7, CONFERENCE PROCEEDINGS, 2009, : 1449 - +
[9] Diagnose System Design of the Solenoid Valve for High Pressure Common Rail Diesel Engine
Xu, Quan-Kui
Zhu, Ke-Qing
Chen, Zi-Qiang
Yang, Lin
[J]. Neiranji Gongcheng/Chinese Internal Combustion Engine Engineering, 2007, 28 (04): : 69 - 72
[10] Study on compound control strategy of rail pressure for high pressure common rail diesel engine
[J]. Shen, L.-Z. (lzshen@public.km.yn.cn), 1600, Chinese Society for Internal Combustion Engines, 92 Weijin Road, Tianjin, Meng Qing, 300072, China (33):

← 1 2 3 4 5 →