Effect of Hot Working on Secondary Phase Formation in 2205 Duplex Stainless Steel

被引:0
|
作者
A.Momeni [1 ]
K.Dehghani [1 ]
机构
[1] Department of Mining and Metallurgy,Amir Kabir University of Technology
关键词
Duplex stainless steel; Aging; Hot working; σ; phase;
D O I
暂无
中图分类号
TG161 [钢的热处理];
学科分类号
080201 ; 080503 ;
摘要
In this research,aging treatments at temperatures of 800 and 900°C for different aging time of 5-60 min were conducted on solution treated as well as hot worked samples of 2205 dual phase stainless steel.The effect of aging treatment on precipitation of intermetallic phases was investigated in undeformed specimens and those subjected to hot deformation with different strain rates of 0.001-1 s-1.It was found that σ precipitation increased by hot working.It was also concluded that the volume fraction of phase increased with deformation temperature and decreased with strain rate.The precipitation of intermetallic phases(i.e.σ and χ) was analyzed by an Avrami-type kinetics equation of %(σ+χ)=A(1-exp(-ktn)) and the values of n and ln k were estimated for different thermomechanical regimes.The values of n were assessed to increase from 0.4 to 1 with strain rate in the studied range.Otherwise,It was also understood that ln k decreased with strain rate.Microstructural observations by means of optical microscopy and scanning electron microscopy showed that σ particles mostly nucleated at the ferrite-austenite interfaces.But no sign of χ-phase could be seen.This fortified the idea of certain literature that χ-phase always forms at early stages of aging and consumes through the precipitation of σ.
引用
收藏
页码:851 / 857
页数:7
相关论文
共 50 条
  • [1] Effect of Hot Working on Secondary Phase Formation in 2205 Duplex Stainless Steel
    Momeni, A.
    Dehghani, K.
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2010, 26 (09) : 851 - 857
  • [2] Processing map for hot working characteristics of a wrought 2205 duplex stainless steel
    Chen, Lei
    Ma, Xiaocong
    Liu, Xiao
    Wang, Longmei
    MATERIALS & DESIGN, 2011, 32 (03) : 1292 - 1297
  • [3] Effect of cold working and isothermal aging on the precipitation of sigma phase in 2205 duplex stainless steel
    Cho, Noon-Sung
    Lee, Kwangmin
    MATERIALS CHARACTERIZATION, 2013, 75 : 29 - 34
  • [4] Hot Deformation Behavior of Duplex Stainless Steel 2205
    Zhang, Yong-jun
    Dong, Yuan
    Hu, Jie-ren
    Zhang, Hui
    Han, Jing-tao
    METAL SCIENCE AND HEAT TREATMENT, 2024, 65 (9-10) : 624 - 628
  • [5] Hot Deformation Behavior of Duplex Stainless Steel 2205
    Zhang Yong-jun
    Dong Yuan
    Hu Jie-ren
    Zhang Hui
    Han Jing-tao
    Metal Science and Heat Treatment, 2024, 65 : 624 - 628
  • [6] Mechanical and microstructural analysis of 2205 duplex stainless steel under hot working condition
    Momeni, A.
    Dehghani, K.
    Zhang, X. X.
    JOURNAL OF MATERIALS SCIENCE, 2012, 47 (06) : 2966 - 2974
  • [7] HOT DEFORMATION BEHAVIOR OF 2205 DUPLEX STAINLESS STEEL
    Chen Lei
    Wang Longmei
    Du Xiaojian
    Liu Xiao
    ACTA METALLURGICA SINICA, 2010, 46 (01) : 52 - 56
  • [8] Mechanical and microstructural analysis of 2205 duplex stainless steel under hot working condition
    A. Momeni
    K. Dehghani
    X. X. Zhang
    Journal of Materials Science, 2012, 47 : 2966 - 2974
  • [9] HOT TENSILE TESTING OF SAF 2205 DUPLEX STAINLESS STEEL
    Tehovnik, Franc
    Zuzek, Borut
    Burja, Jaka
    MATERIALI IN TEHNOLOGIJE, 2016, 50 (06): : 989 - 993
  • [10] Sigma phase precipitation in duplex stainless steel 2205
    Sieurin, Henrik
    Sandstrom, Rolf
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 444 (1-2): : 271 - 276