Assimilating Doppler radar observations with an ensemble Kalman filter for convection-permitting prediction of convective development in a heavy rainfall event during the pre-summer rainy season of South China

This study examines the effectiveness of an ensemble Kalman filter based on the weather research and forecasting model to assimilate Doppler-radar radial-velocity observations for convection-permitting prediction of convection evolution in a high-impact heavy-rainfall event over coastal areas of South China during the pre-summer rainy season. An ensemble of 40 deterministic forecast experiments(40 DADF) with data assimilation(DA) is conducted, in which the DA starts at the same time but lasts for different time spans(up to 2 h) and with different time intervals of 6, 12, 24, and 30 min. The reference experiment is conducted without DA(NODA).To show more clearly the impact of radar DA on mesoscale convective system(MCS)forecasts, two sets of 60-member ensemble experiments(NODA EF and exp37 EF) are performed using the same 60-member perturbed-ensemble initial fields but with the radar DA being conducted every 6 min in the exp37 EF experiments from 0200 to0400 BST. It is found that the DA experiments generally improve the convection prediction. The 40 DADF experiments can forecast a heavy-rain-producing MCS over land and an MCS over the ocean with high probability, despite slight displacement errors. The exp37 EF improves the probability forecast of inland and offshore MCSs more than does NODA EF. Compared with the experiments using the longer DA time intervals, assimilating the radial-velocity observations at 6-min intervals tends to produce better forecasts. The experiment with the longest DA time span and shortest time interval shows the best performance.However, a shorter DA time interval(e.g., 12 min) or a longer DA time span does not always help. The experiment with the shortest DA time interval and maximum DA window shows the best performance, as it corrects errors in the simulated convection evolution over both the inland and offshore areas. An improved representation of the initial state leads to dynamic and thermodynamic conditions that are more conducive to earlier initiation of the inland MCS and longer maintenance of the offshore MCS.