Numerical simulation of an algal bloom in Dianshan Lake

A hydrodynamic model and an aquatic ecology model of Dianshan Lake,Shanghai,were built using a hydrodynamic simulation module and the water quality simulation module of Delft3D,which is an integrated modelling suite offered by Deltares. The simulated water elevation,current velocity,and direction were validated with observed data to ensure the reliability of hydrodynamic model. The seasonal growth of different algae was analyzed with consideration of observed and historical data,as well as simulated results. In 2008,the dominant algae in Dianshan Lake was Bacillariophyta from February to March,while it was Chlorophyta from April to May,and Cyanophyta from July to August. In summer,the biomass of Cyanophyta grew quickly,reaching levels much higher than the peaks of Bacillariophyta and Chlorophyta. Algae blooms primarily occurred in the stagnation regions. This phenomenon indicates that water residence time can influence algal growth significantly. A longer water residence time was associated with higher algal growth. Two conclusions were drawn from several simulations: reducing the nutrients inflow had little effect on algal blooms in Dianshan Lake; however,increasing the discharge into Dianshan Lake could change the flow field characteristic and narrow the range of stagnation regions,resulting in inhibition of algal aggregation and propagation and a subsequent reduction in areas of high concentration algae.