The effects of fabrication atmosphere condition on the microstructural and mechanical properties of laser direct manufactured stainless steel 17-4 PH

被引：1
|
作者：
D.Wang [1 ]
C.T.Chi [2 ]
W.Q.Wang [3 ]
Y.L.Li [3 ]
M.S.Wang [2 ]
X.G.Chen [1 ]
Z.H.Chen [4 ]
X.P.Cheng [1 ]
Y.J.Xie [2 ]
机构：
[1] Institute of Applied Physics, Jiangxi Academy of Sciences
[2] Institute of Metal Research, Chinese Academy of Sciences
[3] School of Mechanical and Electrical Engineering, Nanchang University
来源：
Journal of Materials Science & Technology | 2019年 / 35卷 / 07期
关键词：
Additive manufacturing; Laser direct manufacturing; 17-4PH stainless steel; Fabrication atmosphere; Mechanical properties;
D O I：
暂无
中图分类号：
TG142.71 [不锈钢、耐酸钢];
学科分类号：
080502 ;
摘要：
The effects of atmosphere conditions on microstructural and mechanical properties of stainless steel 17-4PH components fabricated by laser direct manufacturing(LDM) were investigated through measurements on phase constitution, porosity, tensile strength, fracture morphology, hardness and evolution of substrate temperature. Results showed that the samples produced in air atmosphere condition possessed higher tensile strength and hardness for both as-deposited and heat-treated states than that in Ar chamber condition, due to dispersion strengthening effect of amorphous oxide particles and nitrogen solution strengthening as a result of higher content of oxygen and nitrogen. The temperature of substrate heat accumulation was higher in Ar chamber condition, leading to dramatically lower porosity and more reverse austenite, which also contributed to the lower strength and hardness.
引用
收藏
页码：1315 / 1322
页数：8
相关论文
共 50 条
  • [1] The effects of fabrication atmosphere condition on the microstructural and mechanical properties of laser direct manufactured stainless steel 17-4 PH
    Wang, D.
    Chi, C. T.
    Wang, W. Q.
    Li, Y. L.
    Wang, M. S.
    Chen, X. G.
    Chen, Z. H.
    Cheng, X. P.
    Xie, Y. J.
    [J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2019, 35 (07) : 1315 - 1322
  • [2] MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF SELECTIVE LASER MELTED 17-4 PH STAINLESS STEEL
    Yadollahi, Aref
    Shamsaei, Nima
    Thompson, Scott M.
    Elwany, Alaa
    Bian, Linkan
    [J]. PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2015, VOL 2A, 2016,
  • [3] Effect of laser power on the microstructure and properties of additive manufactured 17-4 PH stainless steel in different fabrication atmosphere
    Wang, De
    Cheng, Donghai
    Zhou, Zhangyu
    Wang, Wenqin
    Hu, Bo
    Xie, Yujiang
    Xiong, Zhenyu
    Hu, Dean
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 839
  • [4] Mechanical properties and microstructural characterization of selective laser melted 17-4 PH stainless steel
    Mahmoudi, Mohamad
    Elwany, Alaa
    Yadollahi, Aref
    Thompson, Scott M.
    Bian, Linkan
    Shamsaei, Nima
    [J]. RAPID PROTOTYPING JOURNAL, 2017, 23 (02) : 280 - 294
  • [5] Effects of atomizing media and post processing on mechanical properties of 17-4 PH stainless steel manufactured via selective laser melting
    Pasebani, Somayeh
    Ghayoor, Milad
    Badwe, Sunil
    Irrinki, Harish
    Atre, Sundar, V
    [J]. ADDITIVE MANUFACTURING, 2018, 22 : 127 - 137
  • [6] Laser metal deposition of 17-4 PH stainless steel: Geometrical, microstructural, and mechanical properties investigation for structural applications
    Muslim, Talha
    Karagoz, Taner
    Kurama, Semra
    Sezer, Pelin
    Yazici, Omer Faruk
    Ozkok, Recep
    [J]. CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2023, 41 : 69 - 79
  • [7] Microstructural characterization and mechanical properties of additively manufactured 17-4PH stainless steel
    Eskandari, H.
    Lashgari, H. R.
    Ye, L.
    Eizadjou, M.
    Wang, H.
    [J]. MATERIALS TODAY COMMUNICATIONS, 2022, 30
  • [8] The effects of particle size distribution on the rheological properties of the powder and the mechanical properties of additively manufactured 17-4 PH stainless steel
    Weaver, Jordan S.
    Whiting, Justin
    Tondare, Vipin
    Beauchamp, Carlos
    Peltz, Max
    Tarr, Jared
    Phan, Thien Q.
    Donmez, M. Alkan
    [J]. ADDITIVE MANUFACTURING, 2021, 39
  • [9] Comparison of Mechanical and Microstructural Properties of Laser Powder Bed Fusion Produced and Wrought 17-4 PH Stainless Steel: Review
    Kalita, B.
    Jayaganthan, R.
    [J]. LASERS IN ENGINEERING, 2023, 55 (1-2) : 21 - 37
  • [10] Direct Energy Depositions of a 17-4 PH Stainless Steel: Geometrical and Microstructural Characterizations
    Morales, Cindy
    Merlin, Mattia
    Fortini, Annalisa
    Fortunato, Alessandro
    [J]. COATINGS, 2023, 13 (03)
12345