Thermo-flow characteristics and air flow field leading of the air-cooled condenser cell in a power plant

被引:0
|
作者
ZHANG WanXi
机构
关键词
air-cooled condenser; axial flow fan; finned tube bundle; flow and heat transfer characteristics; flow field leading;
D O I
暂无
中图分类号
TK124 [传热学];
学科分类号
080701 ;
摘要
Special A-frame geometry of the air-cooled condenser cell and the complicated flow field at the exit of the axial flow fan bring on the air mal-distribution on the surface of the finned tube bundles and the deteriorated thermo-flow performances of a condenser cell.It is of benefit to the design and operation optimization of the direct dry cooling system in a power plant to investigate the thermo-flow characteristics of the condenser cell and propose the flow leading measures of cooling air.On the basis of the representative configuration of the air-cooled condenser cell in a 600 MW direct dry cooling power plant,the computational models of the air side fluid and heat flows are built,in which the actual fan blade geometric details are considered.Various flow field leading ways of cooling air are presented and the thermo-flow characteristics in the A-frame condenser cell and through the finned tube bundles are compared.Results show that the flow field leading measures can result in the increased volumetric flow rate and heat rejection,thus bringing on the improved performance of the condenser cell.The improvement of thermo-flow performances depends upon the geometric details of the flow guiding device.
引用
收藏
页码:2475 / 2482
页数:8
相关论文
共 50 条
  • [1] Thermo-flow characteristics and air flow field leading of the air-cooled condenser cell in a power plant
    WanXi Zhang
    LiJun Yang
    XiaoZe Du
    YongPing Yang
    [J]. Science China Technological Sciences, 2011, 54 : 2475 - 2482
  • [2] Thermo-flow characteristics and air flow field leading of the air-cooled condenser cell in a power plant
    ZHANG WanXiYANG LiJunDU XiaoZeYANG YongPing Key Laboratory of Condition Monitoring and Control for Power Plant Equipment of Ministry of EducationSchool of Energy Power and Mechanical EngineeringNorth China Electric Power UniversityBeijing China
    [J]. Science China(Technological Sciences), 2011, 54 (09) : 2475 - 2482
  • [3] Thermo-flow characteristics and air flow field leading of the air-cooled condenser cell in a power plant
    Zhang WanXi
    Yang LiJun
    Du XiaoZe
    Yang YongPing
    [J]. SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 2011, 54 (09) : 2475 - 2482
  • [4] Effects of geometric structures of air deflectors on thermo-flow performances of air-cooled condenser
    Huang, Xianwei
    Chen, Lin
    Kong, Yanqiang
    Yang, Lijun
    Du, Xiaoze
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 118 : 1022 - 1039
  • [5] Thermo-flow performances of air-cooled condenser cell with oblique finned tube bundles
    Jin, Ruonan
    Yang, Xiaoru
    Yang, Lijun
    Du, Xiaoze
    Yang, Yongping
    [J]. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2019, 135 : 478 - 492
  • [6] Wind effect on the thermo-flow performances and its decay characteristics for air-cooled condensers in a power plant
    Yang, L. J.
    Du, X. Z.
    Yang, Y. P.
    [J]. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2012, 53 : 175 - 187
  • [7] Effects of windbreak mesh on thermo-flow characteristics of air-cooled steam condenser under windy conditions
    Zhang, Xuelei
    Chen, Haiping
    [J]. APPLIED THERMAL ENGINEERING, 2015, 85 : 21 - 32
  • [8] Numerical study of the thermo-flow performances of novel finned tubes for air-cooled condensers in power plant
    Guo, Yonghong
    Du, Xiaoze
    Yang, Lijun
    [J]. INTERNATIONAL CONFERENCE ON ENERGY ENGINEERING AND ENVIRONMENTAL PROTECTION (EEEP2017), 2018, 121
  • [9] A novel layout of air-cooled condensers to improve thermo-flow performances
    Chen, Lei
    Yang, Lijun
    Du, Xiaoze
    Yang, Yongping
    [J]. APPLIED ENERGY, 2016, 165 : 244 - 259
  • [10] Flow and heat transfer characteristics of flow guiding device in air-cooled condenser cell
    Yang, Li-Jun
    Pu, Gang
    Du, Xiao-Ze
    Yang, Yong-Ping
    [J]. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2010, 31 (06): : 1001 - 1004