Effect of Solutionizing and Aging on Microstructure and Mechanical Properties of Warm-rolled 7075 Alloy

被引:0
|
作者
杨小容 [1 ]
赵晓东 [1 ]
CHU Zhibing [1 ]
TUO Leifeng [1 ]
机构
[1] School of Materials Science and Engineering, Taiyuan University of Science and Technology
关键词
D O I
暂无
中图分类号
TG156.9 [特殊热处理]; TG146.21 [];
学科分类号
080201 ; 080502 ; 080503 ;
摘要
The effect of solution and aging treatments on microstructure and mechanical properties of warm-rolled 7075 alloy was investigated via optical microscope, electron backscattered diffraction, transmission electron microscopy and tensile tests. The 7075 alloy was subjected to solution treatments at 450 ℃ for 1 h(ST1),490 ℃ for 1 h(ST2) and 1.5 h(ST3). Three aging routes were carried out on samples from ST2: one-step(A1),two-step(A2), and three-step aging(A3). The experimental results show mainly recrystallized equiaxed grains in ST1 and ST3 state but a combination of elongated and equiaxed grains in ST2 condition. Three aged alloys have similar microstructures of sample ST2 while the recrystallization frequency gets decreased after aging.The least recrystallization fraction occurs in A2 state. Three aged 7075 alloys all possess enhanced strength and plasticity. Precipitates characterization reveals the maximum strength is achieved in A2 sample as the matrix precipitates are composed mainly of small η and many η′ phases. Aging route A2 appears preferable to other two aging conditions for attaining a pretty excellent combination of strength and plasticity.
引用
收藏
页码:408 / 415
页数:8
相关论文
共 50 条
  • [1] Effect of Solutionizing and Aging on Microstructure and Mechanical Properties of Warm-rolled 7075 Alloy
    Xiaorong Yang
    Xiaodong Zhao
    Zhibing Chu
    Leifeng Tuo
    [J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2023, 38 : 408 - 415
  • [2] Effect of Solutionizing and Aging on Microstructure and Mechanical Properties of Warm-rolled 7075 Alloy
    Yang, Xiaorong
    Zhao, Xiaodong
    Chu, Zhibing
    Tuo, Leifeng
    [J]. JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2023, 38 (02): : 408 - 415
  • [3] Effect of annealing treatment on the microstructure and mechanical properties of warm-rolled Mg–Zn–Gd–Ca–Mn alloys
    Yifan Song
    Xihai Li
    Jinliang Xu
    Kai Zhang
    Yaozong Mao
    Hong Yan
    Huiping Li
    Rongshi Chen
    [J]. International Journal of Minerals,Metallurgy and Materials., 2024, (10) - 2220
  • [4] Effect of pass reduction on microstructure, mechanical properties and texture of hot-rolled 7075 alloy
    Jiang, Jufu
    Liu, Yingze
    Xiao, Guanfei
    Wang, Ying
    Ju, Yingnan
    [J]. MATERIALS CHARACTERIZATION, 2019, 147 : 324 - 339
  • [5] Effect of annealing treatment on the microstructure and mechanical properties of warm-rolled Mg-Zn-Gd-Ca-Mn alloys
    Song, Yifan
    Li, Xihai
    Xu, Jinliang
    Zhang, Kai
    Mao, Yaozong
    Yan, Hong
    Li, Huiping
    Chen, Rongshi
    [J]. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2024, 31 (10) : 2208 - 2220
  • [6] Influence of Annealing Temperature on Microstructure and Properties of Warm-rolled AZ31 Magnesium Alloy Sheets
    Zhang, Hua
    Huang, Guangsheng
    Lin, Jinhan
    Wang, Lifei
    [J]. HIGH PERFORMANCE STRUCTURE MATERIALS, 2013, 747-748 : 352 - 358
  • [7] STRUCTURE AND PROPERTIES OF WARM-ROLLED STEELS
    UVIRA, JL
    WORTHING.PJ
    CLAY, DB
    EMBURY, JD
    [J]. CANADIAN METALLURGICAL QUARTERLY, 1972, 11 (02) : 439 - &
  • [8] Study on mechanical properties of warm-rolled AISI 1015 carbon steel
    Medrea-Bichtas, C
    Negrea, G
    Domsa, S
    [J]. ZEITSCHRIFT FUR METALLKUNDE, 2004, 95 (03): : 176 - 178
  • [9] Effect of ageing on microstructure and mechanical properties of bulk, cryorolled, and room temperature rolled Al 7075 alloy
    Panigrahi, Sushanta Kumar
    Jayaganthan, R.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (40) : 9609 - 9616
  • [10] Effect of aging temperature and of retrogression treatment time on the microstructure and mechanical properties of alloy AA 7075
    Karaaslan, A.
    Kaya, I.
    Atapek, H.
    [J]. METAL SCIENCE AND HEAT TREATMENT, 2007, 49 (9-10) : 443 - 447