Suction Performance and Internal Flow of a 2-Bladed Helical Inducer with Inlet Asymmetric Plate

被引:0
|
作者
S.Watanabe [1 ]
Y.Uchinono [2 ]
K.Ishizaka [1 ]
A.Furukawa [3 ]
J.-H.Kim [4 ]
机构
[1] Department of Mechanical Engineering, Kyushu University,744 Motooka Nishi-ku, Fukuoka 819-0395, Japan
[2] Graduate School of Engineering, Kyushu University,744 Motooka Nishi-ku, Fukuoka 819-0395, Japan
[3] Oita National College of Technology
关键词
Inducer; Cavitation; Suction performance; Internal flow; Inlet asymmetric plate;
D O I
暂无
中图分类号
TH38 [各种用途];
学科分类号
摘要
It has been found in our past studies that the installation of asymmetric plate at the inlet of inducer is effective for the suppression of cavitation surge phenomenon.In the present study,the suction performance of 2-bladed helical inducer with an inlet asymmetric plate is experimentally investigated.It is observed that the suction performance in large flow rate conditions is not significantly influenced by the asymmetric plate,whereas the head of inducer with the asymmetric plate increases just before the head breakdown in partial flow conditions.To understand the mechanism of this additional head,the flow measurements and the numerical simulations are carried out.It is found that the circumferential component of absolute velocity at the exit of inducer slightly increases with the development of cavitation in both cases with and without the inlet asymmetric plate,indicating the increase of the theoretical head.The theoretical head increase with the inlet asymmetric plate is also confirmed by the unsteady numerical simulations,suggesting that the additional head is achieved through the increase of the theoretical head with the change of the exiting flow from the inducer associated with some amount of cavitation.
引用
收藏
页码:395 / 403
页数:9
相关论文
共 50 条
  • [1] Suction Performance and Internal Flow of a 2-Bladed Helical Inducer with Inlet Asymmetric Plate
    Watanabe, S.
    Uchinono, Y.
    Ishizaka, K.
    Furukawa, A.
    Kim, J. -H.
    JOURNAL OF THERMAL SCIENCE, 2013, 22 (05) : 395 - 403
  • [2] Suction performance and internal flow of a 2-bladed helical inducer with inlet asymmetric plate
    S. Watanabe
    Y. Uchinono
    K. Ishizaka
    A. Furukawa
    J. -H. Kim
    Journal of Thermal Science, 2013, 22 : 395 - 403
  • [3] A STUDY ON BACK FLOW STRUCTURE IN A 2-BLADED HELICAL INDUCER AT A PARTIAL FLOW RATE
    Watanabe, Satoshi
    Inoue, Naoki
    Ishizaka, Koichi
    Furukawa, Akinori
    Kim, Jun-Ho
    PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER CONFERENCE, VOL 1, PTS A-C, 2009, : 267 - 275
  • [4] Unsteady stress of 4-bladed inducer blades and the effect of inlet flow distortion
    Fujii, A
    Azuma, S
    Yoshida, Y
    Tsujimoto, Y
    Laffite, S
    JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING, 2002, 45 (01) : 47 - 54
  • [5] Unsteady stress of 4-bladed inducer blades and the effect of inlet flow distortion
    Fujii, Akira
    Azuma, Seiji
    Yoshida, Yoshiki
    Tsujimoto, Yoshinobu
    Laffite, Stéphane
    Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 2002, 68 (665): : 153 - 160
  • [6] Anti-cavitation performance of a splitter-bladed inducer under different flow rates and different inlet pressures
    XiaoMei Guo
    ZuChao Zhu
    BaoLing Cui
    Yong Huang
    Science China Technological Sciences, 2015, 58 : 2131 - 2138
  • [7] Anti-cavitation performance of a splitter-bladed inducer under different flow rates and different inlet pressures
    GUO XiaoMei
    ZHU ZuChao
    CUI BaoLing
    HUANG Yong
    Science China(Technological Sciences), 2015, 58 (12) : 2131 - 2138
  • [8] Anti-cavitation performance of a splitter-bladed inducer under different flow rates and different inlet pressures
    GUO XiaoMei
    ZHU ZuChao
    CUI BaoLing
    HUANG Yong
    Science China(Technological Sciences), 2015, (12) : 2131 - 2138
  • [9] Anti-cavitation performance of a splitter-bladed inducer under different flow rates and different inlet pressures
    Guo XiaoMei
    Zhu ZuChao
    Cui BaoLing
    Huang Yong
    SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 2015, 58 (12) : 2131 - 2138
  • [10] Numerical/experimental investigations on inlet back flow in a helical inducer in partial flow conditions
    Watanabe, Satoshi
    Kim, Jun-Ho
    Ishizaka, Koichi
    Furukawa, Akinori
    FEDSM 2007: PROCEEDINGS OF THE 5TH JOINT ASME/JSME FLUIDS ENGINEERING SUMMER CONFERENCE, VOL 2, PTS A AND B, 2007, : 893 - 898