Two-Dimensional Transient Temperature Field of Finish Rolling Section in Hot Tandem Rolling

被引：0
|
作者：
YANG Li-po [1 ]
PENG Yan [1 ]
LIU Hong-min [1 ]
机构：
[1] Yanshan University
来源：
Journal of Iron and Steel Research(International) | 2004年 / 11卷 / 04期
基金：
中国国家自然科学基金;
关键词：
hot tandem rolling; temperature field; finite difference method; heat transfer coefficient;
D O I：
10.13228/j.boyuan.issn1006-706x.2004.04.007
中图分类号：
TG335.11 [热轧];
学科分类号：
080201 ; 080503 ;
摘要：
Comprehensively considering the factors such as descaling cooling,air cooling,water cooling,frictional heat and deformation heat in gap of every stand,heat conduction between work roll and strip etc,a model of two-dimensional transient temperature field of finish rolling section in hot tandem rolling was built with finite difference method to calculate the temperature fields of strip and work roll.So two-dimensional accurate analysis and calculation of strip temperature were realized,and the theoretical basis for predicting and controlling strip temperature was provided.The simulated results show that the model is practical and reliable.
引用
收藏
页码：29 / 33
页数：5
相关论文
共 50 条
  • [1] Two-dimensional transient temperature field of finish rolling section in hot tandem rolling
    Yang, LP
    Peng, Y
    Liu, HM
    [J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2004, 11 (04) : 29 - 33
  • [2] Numerical simulation of temperature field in the finish rolling of plate
    Li, Li-Xin
    Wang, Ling-Yun
    Zhou, Jia-Lin
    Tang, Li
    [J]. Wuhan Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Wuhan University of Science and Technology (Natural Science Edition), 2002, 25 (02):
  • [3] Two-dimensional transient thermal behavior of work rolls in rolling process
    Guo, RM
    [J]. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 1998, 120 (01): : 28 - 33
  • [4] Thermo-mechanical modeling of two phase rolling and microstructure evolution in the hot strip mill - Part I. Prediction of rolling loads and finish rolling temperature
    Phaniraj, MP
    Behera, BB
    Lahiri, AK
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 170 (1-2) : 323 - 335
  • [5] Simplified two-dimensional model for the prediction of pressures and velocities in hot strip rolling
    Zaaf, Mohamed
    Mebarek, Abdelmalek
    Amirat, Abdelaaziz
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 100 (1-4): : 13 - 23
  • [6] Simplified two-dimensional model for the prediction of pressures and velocities in hot strip rolling
    Mohamed Zaaf
    Abdelmalek Mebarek
    Abdelaaziz Amirat
    [J]. The International Journal of Advanced Manufacturing Technology, 2019, 100 : 13 - 23
  • [7] TEMPERATURE-FIELD ON STRIP CROSS-SECTION DURING HOT-ROLLING
    GIERULSKI, B
    CIERNIAK, M
    [J]. STEEL RESEARCH, 1989, 60 (05): : 208 - 214
  • [8] Prediction and analysis of rolling process temperature field for silicon steel in tandem cold rolling
    Guomin Han
    Hongbo Li
    Jie Zhang
    Ning Kong
    Yujin Liu
    Xuechang You
    Yu Xie
    Fei Shang
    [J]. The International Journal of Advanced Manufacturing Technology, 2021, 115 : 1637 - 1655
  • [9] Prediction and analysis of rolling process temperature field for silicon steel in tandem cold rolling
    Han, Guomin
    Li, Hongbo
    Zhang, Jie
    Kong, Ning
    Liu, Yujin
    You, Xuechang
    Xie, Yu
    Shang, Fei
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 115 (5-6): : 1637 - 1655
  • [10] Rolling up two-dimensional sheets into nanoscrolls
    Ji, Eunji
    Son, Jangyup
    Kim, Jong Hun
    Lee, Gwan-Hyoung
    [J]. FLATCHEM, 2018, 7 : 26 - 33
12345