Effect of Microstructure on Exhaust Manifold Cracks Produced From SiMo Ductile Iron

被引：0
|
作者：
Havva Kazdal Zeytin [1 ]
Ceylan Kubilay [1 ]
Hseyin Aydin [1 ]
Ali Aslan Ebrinc [2 ]
Bilal Aydemir [2 ]
机构：
[1] TUBITAK MAM,Materials Institute
[2] Ford Otosan A S
来源：
Journal of Iron and Steel Research(International) | 2009年 / 16卷 / 03期
关键词：
SiMo alloy; cast iron; exhaust manifold;
D O I：
10.13228/j.boyuan.issn1006-706x.2009.03.010
中图分类号：
TG143.5 [球墨铸铁];
学科分类号：
摘要：
Ductile cast irons are used as high temperature materials in internal combustion engines,because they are microstructurally stable at high operating temperatures. SiMo granular graphite cast irons contain Fe2MoC and M6C carbide precipitates due to their higher concentration of both silicon and molybdenum. The microstructure of these cast irons consists of carbides dispersed within the ferrite matrix. The microstructural change and the crack formation mechanism in manifolds produced from SiMo ductile iron are studied. Chemical analysis,optical and scanning electron microscope studies have been completed and evaluated.
引用
收藏
页码：32 / 36
页数：5
相关论文
共 50 条
  • [1] Effect of microstructure on exhaust manifold cracks produced from SiMo ductile iron
    Havva Kazdal Zeytin
    Ceylan Kubilay
    Hüseyin Aydin
    Ali Aslan Ebrinc
    Bilal Aydemir
    Journal of Iron and Steel Research International, 2009, 16 : 32 - 36
  • [2] Effect of Microstructure on Exhaust Manifold Cracks Produced From SiMo Ductile Iron
    Zeytin, Havva Kazdal
    Kubilay, Ceylan
    Aydin, Hueseyin
    Ebrinc, Ali Asian
    Aydemir, Bilal
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2009, 16 (03) : 32 - 36
  • [3] Effect of Nb/V Alloying on the Microstructure and Mechanical Properties of SiMo Ductile Iron
    Chao, Yi
    Wenyong, Jiang
    Yicheng, Feng
    Erjun, Guo
    Changliang, Wang
    Lei, Wang
    INTERNATIONAL JOURNAL OF METALCASTING, 2025, 19 (01) : 95 - 108
  • [4] A Thermomechanical Fatigue Analysis on a Ductile Cast Iron Exhaust Manifold
    Liu, Yi
    Chen, Yi-Hsin
    Sawkar, Nandan
    Xu, Nan
    Gaikwad, Surendra
    Seaton, Philip
    Singh, Kanwerdip
    SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING, 2018, 11 (04) : 517 - 528
  • [5] Effect of Molybdenum Contents on Microstructure and High-Temperature Wear Behavior of SiMo Ductile Iron
    Dawlat M. Abdelrahim
    Ebtesam E. Ateia
    Adel A. Nofal
    International Journal of Metalcasting, 2024, 18 : 530 - 545
  • [6] Effect of Molybdenum Contents on Microstructure and High-Temperature Wear Behavior of SiMo Ductile Iron
    Abdelrahim, Dawlat M.
    Ateia, Ebtesam E.
    Nofal, Adel A.
    INTERNATIONAL JOURNAL OF METALCASTING, 2024, 18 (01) : 530 - 545
  • [7] Evaluation of Microstructure and Abrasive Wear-Resistance of Medium Alloy SiMo Ductile Cast Iron
    Dyrlaga, Lukasz
    Zapala, Renata
    Morgiel, Krzysztof
    Studnicki, Andrzej
    Szczesny, Andrzej
    Kopycinski, Dariusz
    MATERIALS, 2024, 17 (05)
  • [8] Microstructure and Reciprocating Sliding Wear Resistance Evaluation on SiMo Ductile Iron Low Alloyed with Cobalt
    Colin-Garcia, Eduardo
    Cruz-Ramirez, Alejandro
    Moreno-Rios, Marisa
    Sanchez-Alvarado, Ricardo Gerardo
    Romero-Serrano, Jose Antonio
    Jimenez-Lugos, Juan Cancio
    Martinez-Perez, Armando Irvin
    Vera-Cardenas, Edgar Ernesto
    CRYSTALS, 2025, 15 (03)
  • [9] Effect of Bismuth on Microstructure and Properties of Ductile Iron
    Boonmee, S.
    Waenthongkham, W.
    Worakhut, K.
    INTERNATIONAL JOURNAL OF METALCASTING, 2024,
  • [10] EFFECT OF MICRO-STRUCTURAL DISPERSITY OF SiMo DUCTILE IRON ON THERMAL CYCLING PERFORMANCE
    Lekakh, Simon N. N.
    Athavale, Viraj A. A.
    Bartlett, Laura
    Godlewski, Larry
    Li, Mei
    INTERNATIONAL JOURNAL OF METALCASTING, 2023, 17 (03) : 1451 - 1466
12345