Finite Element Analysis for Multi-pass Equal Channel Angular Pressing

被引：1
|
作者：
王进 [1 ]
陈军 [1 ]
王经涛 [2 ]
机构：
[1] National Die & Mold CAD Eng. Research Center, Shanghai Jiaotong Univ.
[2] Dept. of Materials Science and Eng., Nanjing Univ. of Science and Technology
来源：
Journal of Shanghai Jiaotong University | 2007年 / 03期
基金：
中国国家自然科学基金;
关键词：
equal channel angular pressing(ECAP); finite element method(FEM); flow nets; effective strain;
D O I：
暂无
中图分类号：
TG376 [挤压工艺]; TB115 [计算数学的应用];
学科分类号：
摘要：
Equal channel angular pressing (ECAP) is an attractive process method to produce bulk ultra-fine grained materials. There are many experiment evidences showing that the nature of the microstructural evolution in multi-pass ECAP depends on process routes. Isothermal three dimensional FEM simulations for multi-pass ECAP were performed using DEFORM3D finite element code. The material model of 6061Al-T6 was employed. Flow nets, effective strain distribution in the workpiece and loads during multi-pass ECAP using different routes were analysed respectively. The simulations show process routes influence material flow and effective strain distribution in the workpiece obviously but have few influence on loads.
引用
收藏
页码：347 / 351
页数：5
相关论文
共 50 条
  • [1] Finite element analysis for multi-pass equal channel angular pressing
    National Die and Mold CAD Eng. Research Center, Shanghai Jiaotong Univ., Shanghai 200030, China
    不详
    J. Shanghai Jiaotong Univ. Sci., 2007, 3 (347-351): : 347 - 351
  • [2] Finite element simulation of multi-pass equal channel angular pressing
    Krállics, G
    Széles, Z
    Malgyn, D
    MATERIALS SCIENCE, TESTING AND INFORMATICS, 2003, 414-4 : 439 - 444
  • [3] Finite Element Analysis of Multi-Pass Equal Channel Angular Extrusion/Pressing Process
    Krishnaiah, A.
    Kumaran, K.
    Chakkingal, Uday
    PRICM 7, PTS 1-3, 2010, 654-656 : 1574 - +
  • [4] Finite element analysis of equal channel angular pressing by using a multi-pass die
    Comaneci, R.
    Bujoreanu, L. G.
    Baciu, C.
    Predescu, A. M.
    Savastru, D.
    OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, 2015, 9 (9-10): : 1322 - 1327
  • [5] Finite element modeling of multi-pass equal channel angular extrusion
    Lee, JH
    Son, IH
    Im, YT
    MATERIALS PROCESSING AND DESIGN: MODELING, SIMULATION AND APPLICATIONS, PTS 1 AND 2, 2004, 712 : 1520 - 1525
  • [6] Numerical Simulation of equal channel angular pressing for multi-pass in different routes
    Zhao, Xiaolian
    Chen, Na
    Zhao, Ningning
    MATERIALS, MECHANICAL ENGINEERING AND MANUFACTURE, PTS 1-3, 2013, 268-270 : 373 - +
  • [7] Study of Multi Pass Equal Channel Angular Pressing Using 3D Finite Element Analysis
    Setia, Rajat
    Sharma, Rahul Swarup
    Sharma, Shanti Swarup
    Raj, K. Hans
    INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS ONE AND TWO, 2010, 1315 : 530 - 535
  • [8] Numerical analysis on the dissimilar channel angular pressing by multi-pass rolling
    Choi, HJ
    Hwang, BB
    Ko, BD
    Lim, JY
    Jang, DH
    DESIGNING, PROCESSING AND PROPERTIES OF ADVANCED ENGINEERING MATERIALS, PTS 1 AND 2, 2004, 449-4 : 101 - 104
  • [9] Development of a multi-pass facility for equal-channel angular pressing to high total strains
    Nakashima, K
    Horita, Z
    Nemoto, M
    Langdon, TG
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 281 (1-2): : 82 - 87
  • [10] Study of material accumulated deformation uniformity of equal channel angular multi-pass pressing process
    Zhao, Guoqun
    Xu, Shubo
    Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 2005, 41 (05): : 177 - 181
12345