Surface Modification of Polyethylene (PE) Films Using Dielectric Barrier Discharge Plasma at Atmospheric Pressure

被引：2

作者：

王坤 ^{[1
]}

李建 ^{[1
]}

任春生 ^{[2
]}

王德真 ^{[2
]}

王友年 ^{[2
]}

机构：

[1] Department of Nuclear Engineering and Nuclear Technology,Engineering and Technical College of Chengdu University of Technology,Leshan 614007,China

[2] State Key Laboratory of Material Modification by Electron,Ion and Laser Beams,Dalian University of Technology,Dalian 116024,China

来源：

Plasma Science and Technology | 2008年 / 04期

关键词：

air dielectric barrier discharge; polyethylene; surface modification; wettability;

D O I：

暂无

中图分类号：

O461 [气体放电（气体导电）];

学科分类号：

0809 ; 080901 ;

摘要：

Modification of the surface properties of polyethylene(PE)films is studied using airdielectric barrier discharge at atmospheric pressure.The treated samples are examined by watercontact angle measurements,Fourier transform infrared attenuated total reflection spectroscopy(FTIR-ATR),X-ray photoelectron spectroscopy(XPS)and scanning electron microscopy(SEM).With the increase in treating time,the water contact angle changes from 93.2°before treatmentto a minimum of 53.3°after a treatment for 50 s.Both ATR and XPS results show some oxidizedspecies are introduced into the sample surface by the plasma treatment and the tendency of thewater contact angle with the treating time is the same as that of oxygen concentration on thetreated sample surface.SEM result shows the surface roughness of PE samples increases with thetreatment time increasing.

引用

页码：433 / 437

页数：5

共 50 条

[1] Surface Modification of Polyethylene (PE) Films Using Dielectric Barrier Discharge Plasma at Atmospheric Pressure
王坤
李建
任春生
王德真
王友年
[J]. Plasma Science and Technology., 2008, 10 (04) - 437
[2] Surface modification of polyethylene (PE) films using dielectric barrier discharge plasma at atmospheric pressure
Wang Kun
Li Jian
Ren Chunsheng
Wang Dezhen
Wang Younian
[J]. PLASMA SCIENCE & TECHNOLOGY, 2008, 10 (04): : 433 - 437
[3] The surface modification of a polyethylene (PE) film using an air Coplanar barrier discharge plasma at atmosphere pressure
Wang, Kun
Li, Jian
Wang, Shi-qing
[J]. PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ELECTRONIC & MECHANICAL ENGINEERING AND INFORMATION TECHNOLOGY (EMEIT-2012), 2012, 23
[4] Surface modification of nanofibrillated cellulose films by atmospheric pressure dielectric barrier discharge
Siro, Istvan
Kusano, Yukihiro
Norrman, Kion
Goutianos, Stergios
Plackett, David
[J]. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2013, 27 (03) : 294 - 308
[5] Surface modifications of polymethylmetacrylate films using atmospheric pressure air dielectric barrier discharge plasma
Fang, Zhi
Liu, Yuan
Liu, Kun
Shao, Tao
Zhang, Cheng
[J]. VACUUM, 2012, 86 (09) : 1305 - 1312
[6] APPLICATION OF ATMOSPHERIC DIELECTRIC BARRIER DISCHARGE PLASMA FOR POLYETHYLENE POWDER MODIFICATION
Pichal, J.
Hladik, J.
Spatenka, P.
Aubrecht, L.
[J]. PROBLEMS OF ATOMIC SCIENCE AND TECHNOLOGY, 2006, (06): : 192 - 194
[7] Surface modification of fluororubber using atmospheric pressure dielectric barrier discharge (DBD)
Tong, Wei
Lu, Canhui
Cai, Yongkun
Huang, Yigang
[J]. PLASMA SCIENCE & TECHNOLOGY, 2007, 9 (03): : 296 - 300
[8] Surface Modification of Fluororubber Using Atmospheric Pressure Dielectric Barrier Discharge(DBD)
童薇
卢灿辉
蔡勇昆
黄奕刚
[J]. Plasma Science and Technology, 2007, (03) : 296 - 300
[9] Surface Modification of Fluororubber Using Atmospheric Pressure Dielectric Barrier Discharge(DBD)
童薇
卢灿辉
蔡勇昆
黄奕刚
[J]. Plasma Science and Technology., 2007, 9 (03) - 300
[10] Surface modification of activated carbon using an atmospheric pressure dielectric barrier discharge (DBD) plasma jet
Lubis, R. W.
Saraswati, T. E.
Setiawan, U. H.
Kusumandari, K.
[J]. INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS FOR BETTER FUTURE 2018, 2019, 578

← 1 2 3 4 5 →