A study on HAZ’s microstructure and grain size of 10CrNi3MoV steel

被引:0
|
作者
方洪渊
魏金山
张田宏
机构
[1] Luoyang Ship Material Research Institute
[2] Harbin Institute of Technology
[3] State Key Laboratory of Advanced Welding Production Technology
[4] Luoyang
关键词
high strength steel; heat-affected zone; microstructure; grain size;
D O I
暂无
中图分类号
TG401 [焊接冶金问题];
学科分类号
080201 ; 080503 ;
摘要
This paper deals with microstructure and grain size of HAZ of 590 MPa high strength ship-structure steel with welding simulator. While t 8/5 time is short, 10CrNi3MoV steel’s microstructure of coarse grain heat-affected zone (CGHAZ) is lath martensite structure and a small amount of twined martensite structure; while t 8/5 time is long, it is mainly granular bainite structure. After second thermal cycle with peak temperature between critical temperature Ac 1′ and Ac 3′, CGHAZ has the inheritance of coarse grain and coarse microstructure. Welding energy input (determined by t 8/5 time) has an effect on the inheritance of coarse microstructure, but no influence on the inheritance of coarse grain. In detail, with a shorter t 8/5 time, there is an inheritance of coarse microstructure and grains. With a longer t 8/5 time, there is only the inheritance of coarse grains. While t 8/5 increases, the scope of temperature of causing it diminishes. Therefore, the inheritance of coarse microstructure connects with the high speed of heating and cooling.
引用
收藏
页码:82 / 87
页数:6
相关论文
共 50 条
  • [1] Study of microstructure and grain size of weld HAZ in 10CrNi3MoV steel
    Fang, Hong-Yuan
    Wei, Jin-Shan
    Zhang, Tian-Hong
    2003, Harbin Institute of Technology (11):
  • [2] Effect of arc distance on HAZ thermal cycles and microstructural evolution 10CrNi3MoV steel
    Kang Peng
    Chunli Yang
    Sanbao Lin
    Chenglei Fan
    The International Journal of Advanced Manufacturing Technology, 2017, 90 : 3387 - 3395
  • [3] Effect of arc distance on HAZ thermal cycles and microstructural evolution 10CrNi3MoV steel
    Peng, Kang
    Yang, Chunli
    Lin, Sanbao
    Fan, Chenglei
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 90 (9-12): : 3387 - 3395
  • [4] Thermal cycles and its effect on HAZ microstructure and mechanical properties of 10CrNi3MoV steel in double-sided double arc welding
    Kang Peng
    Chunli Yang
    Sanbao Lin
    Chenglei Fan
    Yongqing Han
    Manpeng Wu
    The International Journal of Advanced Manufacturing Technology, 2017, 93 : 967 - 974
  • [5] Thermal cycles and its effect on HAZ microstructure and mechanical properties of 10CrNi3MoV steel in double-sided double arc welding
    Peng, Kang
    Yang, Chunli
    Lin, Sanbao
    Fan, Chenglei
    Han, Yongqing
    Wu, Manpeng
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 93 (1-4): : 967 - 974
  • [6] 10CrNi3MoV薄板性能研究
    崔黎辉
    沈俊昶
    李才巨
    苏航
    热加工工艺, 2013, 42 (06) : 51 - 53
  • [7] Gradually Changing Surface Microstructure and Impact Resistance of Hot Formed 10CrNi3MoV Marine Steel
    Guo, You-dan
    Liang, Yu-cheng
    Cheng, Jun
    Lan, Jian-feng
    Wu, Hua-feng
    PROCEEDINGS OF THE 2017 INTERNATIONAL CONFERENCE ON MANUFACTURING ENGINEERING AND INTELLIGENT MATERIALS (ICMEIM 2017), 2017, 100 : 103 - 110
  • [8] Mechanical and fatigue properties of undermatching butt joints of 10CrNi3MoV steel
    Zhao, Zhili
    Yang, Jianguo
    Liu, Xuesong
    Fang, Hongyuan
    Hanjie Xuebao/Transactions of the China Welding Institution, 2010, 31 (03): : 89 - 92
  • [9] 10CrNi3MoV钢的韧性研究
    孙民
    材料开发与应用, 1997, (05) : 6 - 9
  • [10] Relationships among Charpy impact toughness, microstructure and fracture behavior in 10CrNi3MoV steel weld joint
    Zhang, Shiwei
    Wang, Yadong
    Zhu, Minhao
    Zhang, Zhijie
    Nie, Pulin
    Li, Zhuguo
    MATERIALS LETTERS, 2020, 281