Finite Element Calculation of the Flexural Stiffness of Corroded RC Eccentric Compressive Members

被引：1
|
作者：
张华 [1 ,2 ]
卫军 [1 ,3 ]
潘硚 [1 ]
黄滢 [1 ]
机构：
[1] School of Civil Engineering and Mechanics,Huazhong University of Science and Technology
[2] Architectural Design and Research Institute,Huazhong University of Science and Technology
[3] School of Civil Engineering and Architecture,Central South University
来源：
Railway Engineering Science | 2010年 / 18卷 / 04期
基金：
中国国家自然科学基金;
关键词：
Reinforced concrete eccentric compressive members; Flexural stiffness; Finite element method; Corrosion degree; Diameter of longitudinal reinforcing bars; Stirrup spacing;
D O I：
暂无
中图分类号：
TU375 [钢筋混凝土结构];
学科分类号：
081304 ; 081402 ;
摘要：
A finite element calculation model of corroded RC eccentric compressive members was build using finite element software ANSYS. The model considers the decline of mechanical properties and the effective section of a corroded steel bar,as well as the deterioration of bond character between corroded reinforcement and concrete. The reliability of the finite element model was evaluated by comparing the results of the finite element calculation with the data from experiments. Based on the finite element analysis results,the influence of corrosion degree,the diameter change of the longitudinal reinforcing bars and the spacing change of stirrups on the flexural stiffness were calculated and analyzed.
引用
收藏
页码：303 / 308
页数：6
相关论文
共 50 条
  • [1] FINITE ELEMENT ANALYSIS OF THE FLEXURAL BEHAVIOR OF CORRODED RC BEAMS STRENGTHENED BY CFRP SHEETS
    Hoai Anh Tran
    Ngoc Tan Nguyen
    Trung Kien Nguyen
    Hoang Giang Nguyen
    INTERNATIONAL JOURNAL OF GEOMATE, 2021, 21 (88): : 42 - 47
  • [2] An effective stiffness model for RC flexural members
    Balevicius, Robertas
    STRUCTURAL ENGINEERING AND MECHANICS, 2006, 24 (05) : 601 - 620
  • [3] Flexural behavior of corroded RC members with patch repair experiments & simulation
    Sahamitmongkol, Raktipong
    Suwathanangkul, Siam
    Phoothong, Porntep
    Kato, Yoshitaka
    JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2008, 6 (02) : 317 - 336
  • [4] Compressive behaviour of locally corroded steel tubular members under eccentric loads
    Pham, Thong M.
    Ong, Ee-Fang
    Tran, Tung T.
    Yan, Zhuge
    Le-Nguyen, Khuong
    Nguyen-Minh, Long
    THIN-WALLED STRUCTURES, 2024, 198
  • [5] An effective stiffness model for GFRP RC cracked flexural members
    Balevicius, R.
    Augonis, M.
    Kliukas, R.
    Bistrickaite, R.
    COMPOSITES PART B-ENGINEERING, 2016, 98 : 415 - 433
  • [6] Finite element investigation of the structural response of corroded RC beams
    Kallias, Alexandros N.
    Rafiq, M. Imran
    ENGINEERING STRUCTURES, 2010, 32 (09) : 2984 - 2994
  • [7] Flexural Stiffness of GFRP- and CFRP-RC Circular Members under Eccentric Loads Based on Experimental and Curvature Analysis
    Hadhood, Abdeldayem
    Mohamed, Hamdy M.
    Benmokrane, Brahim
    ACI STRUCTURAL JOURNAL, 2018, 115 (04) : 1185 - 1198
  • [8] Calculation Method of Stiffness and Deflection of Corroded RC Beam Strengthened by Steel Plate
    Zhang, Qian
    Tang, Huang
    Guo, Shihui
    JORDAN JOURNAL OF MECHANICAL AND INDUSTRIAL ENGINEERING, 2021, 15 (01): : 64 - 70
  • [9] Practical approach for estimating flexural strengths of corroded RC members considering bond strength degradation
    Han, Sun-Jin
    Ju, Hyunjin
    Lee, Deuckhang
    STRUCTURES, 2022, 39 : 808 - 820
  • [10] Finite Element Analysis and Calculation Method of Residual Flexural Capacity of Post-fire RC Beams
    Bin Cai
    Bo Li
    Feng Fu
    International Journal of Concrete Structures and Materials, 2020, 14
12345