Wireless Ranging by Evaluating Received Signal Strength of UWB Chaotic Radio Pulses: Effects of Signal Propagation Conditions

Ultra-wideband radio signals have been the subject of study for several decades. They are used to solve problems of communications and ranging. Measuring the strength (power) of a radio signal is a technically simple way to estimate the distance between the emitter and the receiver of the signal. However, the conditions of signal propagation have a significant impact on the power of the received signal. This work is relevant because chaotic radio pulses are a relatively new type of carrier in wireless technologies, and actual knowledge about the change in signal power in different types of premises is relatively small, so such a study is necessary. In this paper, we study the variation in signal power with distance for chaotic ultra-wideband radio pulses under various propagation conditions. Using experimental measurements in several outdoor (field, roadside) and indoor (corridors, conference room, office) environments, we investigate the effect of propagation conditions on ultra-wideband chaotic radio signals and determine the limits within which the dependence of the calculated power on distance can be approximated by a power law. For this purpose, the results of experimental measurements of the received signal power (a total of about 17.5 M values) were accumulated and analyzed. The accuracy of distance measurement that can be achieved in different conditions is compared and analyzed. It was found that for a 9.5 dBm signal, the range of distances at which the average accuracy is only 15-50 cm when using a power law is 5-7 m indoors and 10-15 m outdoors.