A novel approach of in-cylinder NOx control by inner selective non-catalytic reduction effect for high-pressure direct-injection ammonia engine

被引:5
|
作者
Yang, Rui [1 ]
Yue, Zongyu [1 ]
Zhang, Shouzhen [1 ]
Yu, Zining [1 ]
Wang, Hu [1 ]
Liu, Haifeng [1 ]
Yao, Mingfa [1 ]
机构
[1] Tianjin Univ, State Key Lab Engines, Tianjin 300072, Peoples R China
基金
中国国家自然科学基金;
关键词
Ammonia; High-pressure injection; Diffusion combustion; Nitrogen oxide; Selective non-catalytic reduction; PERFORMANCE-CHARACTERISTICS; AMMONIA/HYDROGEN MIXTURES; FUEL; COMBUSTION; OXIDATION; CHEMISTRY; KINETICS; SYSTEM; OXIDE;
D O I
10.1016/j.fuel.2024.133349
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
As an efficient hydrogen carrier and carbon-free fuel, ammonia shows great promise in realizing zero-carbon propulsions. However, challenges such as poor ignition stability, low combustion efficiency, and fuel-NOx emissions are yet to overcome. In this paper, the high-pressure direct-injection ammonia/diesel dual-fuel combustion mode (HPDF) with post injection strategy is proposed as a solution. The study reveals that HPDF combustion mode enables in-cylinder reduction of NOx, which is attributed to the selective non-catalytic reduction (SNCR) reaction. The results uncover that NH2, 2 , NH, and N radicals have a significant reducing effect on NO and NO2, 2 , while N2O 2 O serves as an important byproduct of the reduction reactions. Subsequently, the generated N2O 2 O can be further reduced to N2 2 through the involvement of O, H, and OH radicals. Building upon these findings, an innovative ammonia post injection method for reducing NOx emissions is explored. The post injection strategy effectively reduces the NOx emissions with only a minor decrease in indicated thermal efficiency, but an over-delayed post injection could also cause significant increase in N2O 2 O and unburned NH3 3 emissions. A post injection proportion of 20%-30% with appropriate post injection timing is found to achieve desired emission reduction. Overall, the HPDF combustion mode is a promising solution for ammonia engine, due to the high thermal efficiency and low nitrogen oxide emissions, as well as the ability to further reduce the NOx emissions through ammonia post injection strategy.
引用
收藏
页数:13
相关论文
共 14 条
  • [1] Effect of Selective Non-Catalytic Reduction Reaction on the Combustion and Emission Performance of In-Cylinder Direct Injection Diesel/Ammonia Dual Fuel Engines
    Wang, Zhongcheng
    Li, Ruhong
    Zhu, Jie
    Fu, Zhenqiang
    ENERGIES, 2025, 18 (03)
  • [2] Inner Selective Non-Catalytic Reduction Strategy for Nitrogen Oxides Abatement: Investigation of Ammonia Aqueous Solution Direct Injection with an SI Engine Model
    He, Fengshuo
    Yu, Xiumin
    Du, Yaodong
    Shang, Zhen
    Guo, Zezhou
    Li, Guanting
    Li, Decheng
    ENERGIES, 2019, 12 (14)
  • [3] A study for the high efficiency and low NOx emission potential of a high-pressure direct-injection hydrogen engine
    Hydrogen Energy Research Center, Musashi Institute of Technology, Tamazutsumi 1-28-1, Setagaya, Tokyo, Japan
    不详
    Rev. Automot. Eng., 2009, 2 (121-127):
  • [4] Development of engine control using the in-cylinder pressure signal in a high speed direct injection diesel engine
    S. Yu
    H. Choi
    S. Cho
    K. Han
    K. Min
    International Journal of Automotive Technology, 2013, 14 : 175 - 182
  • [5] DEVELOPMENT OF ENGINE CONTROL USING THE IN-CYLINDER PRESSURE SIGNAL IN A HIGH SPEED DIRECT INJECTION DIESEL ENGINE
    Yu, S.
    Choi, H.
    Cho, S.
    Han, K.
    Min, K.
    INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, 2013, 14 (02) : 175 - 182
  • [6] Study on the mechanism of the ignition process of ammonia/hydrogen mixture under high-pressure direct-injection engine conditions
    Wang, Yang
    Zhou, Xiaohu
    Liu, Long
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2021, 46 (78) : 38871 - 38886
  • [7] Characteristics of in-cylinder flow and mixture formation in a high-pressure spray-guided gasoline direct-injection optically accessible engine using PIV measurements and CFD
    Kim, Donghwan
    Shin, Jisoo
    Son, Yousang
    Park, Sungwook
    ENERGY CONVERSION AND MANAGEMENT, 2021, 248
  • [8] Innovative method of in-cylinder purification emission control in low-speed marine engines: Numerical study on ammonia/diesel high-pressure direct injection
    Shi, Xinru
    Xiong, Qian
    Wang, Huaiyu
    Han, Kai
    Liu, Long
    Pan, Congyi
    Zhao, Jianhui
    APPLIED THERMAL ENGINEERING, 2025, 267
  • [9] Effect of fuel injection spatial and temporal arrangement on high-pressure direct-injection ammonia/diesel dual-fuel combustion
    Yang, Rui
    Yu, Zining
    Yue, Zongyu
    Yao, Mingfa
    FUEL, 2025, 387
  • [10] Improvement of thermal efficiency and reduction of NOx emissions by burning a controlled jet plume in high-pressure direct-injection hydrogen engines
    Takagi, Yasuo
    Mori, Hiroki
    Mihara, Yuji
    Kawahara, Nobuyuki
    Tomita, Eiji
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2017, 42 (41) : 26114 - 26122