The impact of volume of dissolution medium for biopredictive dissolution/permeation studies of enabling formulations: A comparison of two brands of telmisartan / amlodipine tablets

For compendial dissolution testing of solid dosage forms, media volumes of 500 to 900 mL are used in apparatus I and II to ensure sink conditions. However, these volumes are considerably larger than those in the gastrointestinal tract. Thus, the experiments are not biomimetic and possibly not suitable for biopredictive dissolution testing. The present study investigates the influence of volumes of dissolution media in non-compendial dissolution/permeation settings. Dissolution/permeation studies of two commercial bilayer tablets (Twynsta (R) and Arrow) containing the active pharmaceutical ingredients telmisartan (40 mg) and amlodipine (10 mg) were evaluated using the MacroFlux tool with various biomimetic media mimicking fasted and fed states as well as biological variability ("biorelevant"). Particularly, the two-stage dissolution process of telmisartan from the tablets is interesting because the compound has a pH-dependent solubility, and 2-stage dissolution leads to supersaturation and precipitation upon pH shift. For telmisartan, lower dissolution volumes significantly induced precipitation, leading to lower permeation, while no precipitation was observed in the larger volume. The permeation of telmisartan was overly sensitive to both pH and micelle concentrations in the biomimetic media. Amlodipine showed complete dissolution under any conditions, which correlates with its known complete absorption in vivo. In conclusion, volumes of dissolution media (and their compositions) are key parameters and play a significant role for designing relevant biomimetic experiments used to predict the bioavailability of supersaturating systems. (c) 2024 The Authors. Published by Elsevier Inc. on behalf of American Pharmacists Association. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/)