Insights Into Turbocharger Centrifugal Compressor Stability Using High-Fidelity Computational Fluid Dynamics and a Novel Impeller Diffusion Factor

被引:0
|
作者
Liu, Yiming [1 ]
Spence, Stephen [1 ]
Horsley, John [2 ]
Mann, Stuart [2 ]
Stuart, Charles [1 ]
机构
[1] Trinity Coll Dublin, Dept Mech Mfg & Biomed Engn, Dublin D02 PN40, Ireland
[2] Cummins Turbo Technol, Aerodynam Performance, St Andrews Rd, Huddersfield HD1 6RA, England
来源
关键词
turbocharger compressor; stability; impeller diffusion factor; ported shroud; centrifugal compressors; compressor stall; surge; and operability; computational fluid dynamics (CFD);
D O I
10.1115/1.4066742
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Turbocharger technologies are widely applied in the modern automotive industry to meet increasingly stringent carbon emission standards. To support the continuous enhancement of these tactics, delivering improvement to the performance and stability of turbocharger compressors at low mass flowrate regimes is of paramount importance. This chapter investigates the stability of a turbocharger compressor stage equipped with a ported shroud, using high-fidelity computational fluid dynamics (CFD) simulations. It was found that the recirculated flow passing through the ported shroud device had primary influence on the flow condition in the vicinity of the impeller tip region (80-100% span). This discovery facilitated the definition of a modified impeller diffusion factor (DF), which was applied to the CFD results for three different compressor geometry configurations to lead to the provision of quantitative metrics for impeller stability. Furthermore, the observed change in the limiting impeller DF along the compressor surge line indicated that the dominant components governing the instability of the entire stage had switched, i.e., the stalling behavior of the compressor stage had transitioned from impeller dominated stall to vaneless diffuser dominated stall. Additionally, the limiting impeller DF clearly showed that one of the compressor configurations with a change in the hub endwall recess around the rear of the impeller improved the impeller stability by 3%. By comparison, another configuration with a change to strut geometry in the ported shroud recirculation channel reduced the impeller stability by 10%. The present work addressed the gap in the understanding about the stability of different compressor configurations equipped with a ported shroud, and was useful for determining the changes in compressor global and local instability through a quantitative parameter based on a modified definition of DF.
引用
收藏
页数:11
相关论文
共 42 条
  • [1] INISIGHTS INTO TURBOCHARGER CENTRIFUGAL COMPRESSOR STABILITY USING HIGH-FIDELITY CFD AND A NOVEL IMPELLER DIFFUSION FACTOR
    Liu, Yiming
    Spence, Stephen
    Horsley, John
    Mann, Stuart
    Stuart, Charles
    PROCEEDINGS OF ASME TURBO EXPO 2024: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, GT2024, VOL 12D, 2024,
  • [2] Design methodology and computational fluid dynamics of the impeller and volute of a centrifugal compressor
    Felipe Rincon-Franco, Juan
    Fernando Garcia-Sanchez, Gabriel
    UIS INGENIERIAS, 2020, 19 (01): : 49 - 58
  • [3] Unsteady flow in a turbocharger centrifugal compressor: Three-dimensional computational fluid dynamics simulation and numerical and experimental analysis of impeller blade vibration
    Dickmann, HP
    Wimmel, TS
    Szwedowicz, J
    Filsinger, D
    Roduner, CH
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2006, 128 (03): : 455 - 465
  • [4] Unsteady Steam Turbine Optimization Using High-Fidelity Computational Fluid Dynamics
    Iranidokht, Vahid
    Papagiannis, Ilias
    Kalfas, Anestis, I
    Abhari, Reza S.
    Senoo, Shigeki
    Momma, Kazuhiro
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2021, 143 (09):
  • [5] Aerodynamic synthesis of a centrifugal impeller using computational fluid dynamics and measurements
    Larosiliere, LM
    Skoch, GJ
    Prahst, PS
    JOURNAL OF PROPULSION AND POWER, 1999, 15 (05) : 623 - 632
  • [6] Aerodynamic synthesis of a centrifugal impeller using computational fluid dynamics and measurements
    Larosiliere, L.M.
    Skoch, G.J.
    Prahst, P.S.
    Journal of Propulsion and Power, 15 (05): : 623 - 632
  • [7] Design optimization of a centrifugal pump impeller and volute using computational fluid dynamics
    Kim, J. H.
    Oh, K. T.
    Pyun, K. B.
    Kim, C. K.
    Choi, Y. S.
    Yoon, J. Y.
    26TH IAHR SYMPOSIUM ON HYDRAULIC MACHINERY AND SYSTEMS, PTS 1-7, 2013, 15
  • [8] A de-coupled approach to component high-fidelity analysis using computational fluid dynamics
    Pachidis, V.
    Pilidis, P.
    Templalexis, I.
    Barbosa, J. B.
    Nantua, N.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 2007, 221 (G1) : 105 - 113
  • [9] Neko: A modern, portable, and scalable framework for high-fidelity computational fluid dynamics
    Jansson, Niclas
    Karp, Martin
    Podobas, Artur
    Markidis, Stefano
    Schlatter, Philipp
    COMPUTERS & FLUIDS, 2024, 275
  • [10] High-Fidelity Computational Fluid Dynamics Methods for the Simulation of Propeller Stall Flutter
    Higgins, Ross J.
    Jimenez-Garcia, Antonio
    Barakos, George N.
    Bown, Nicholas
    AIAA JOURNAL, 2019, 57 (12) : 5281 - 5292