Impact of zigzag tape on blade loads and aerodynamic wake in a vertical axis wind turbine: A Delft VAWT case study

This study investigates the impact of zigzag tape on the aerodynamic performance and wake characteristics of the Delft Vertical Axis Wind Turbine (VAWT). The primary aim is to understand how the zigzag tape affects blade loads and the resulting aerodynamic wake. A comprehensive analysis was conducted using the Actuator Line Model (ALM) with airfoil characteristics measured in the wind tunnel at the Technical University of Denmark (DTU). Additionally, a 2-D CFD analysis with k-aSST and y-Re theta turbulence models were employed to evaluate the influence of laminar transition phenomena on rotor characteristics. Results indicate that while the zigzag tape linearizes the lift coefficient characteristic, it leads to a notable reduction in aerodynamic efficiency due to increased drag and decreased lift below the critical angle of attack. The simulations were performed at a tip-speed ratio (TSR) of 4.5 to avoid a dynamic stall, as this operating condition ensures that the rotor blades remain below the static stall threshold and large offshore VAWTs are designed to operate near their maximum aerodynamic efficiency (CP) for the majority of their operational time. The aerodynamic wake behind the rotor also shows significant changes, with the zigzag tape promoting asymmetry and affecting the wake recovery distance. The study's findings highlight the importance of considering surface contamination effects, represented by zigzag tape, in evaluating VAWT performance and wake behavior, offering valuable insights for wind turbine design and optimization.