Kinematics and Workspace of a Spatial 3-DoF Manipulator with Anti-parallelogram joints

被引：0

作者：

Muralidharan, Vimalesh ^{[1
]}

Chevallereau, Christine ^{[1
]}

Wenger, Philippe ^{[1
]}

机构：

[1] Nantes Univ, CNRS, UMR 6004, Ecole Cent Nantes,LS2N, F-44000 Nantes, France

来源：

ADVANCES IN ROBOT KINEMATICS 2024, ARK 2024 | 2024年 / 31卷

关键词：

Anti-parallelogram joint; spatial manipulator; inverse kinematics; workspace; ROBOT;

D O I：

10.1007/978-3-031-64057-5_5

中图分类号：

TP24 [机器人技术];

学科分类号：

080202 ; 1405 ;

摘要：

This paper introduces a novel spatial serial manipulator composed of three anti-parallelogram (X) joints arranged in two perpendicular planes and separated by offsets. The position of a point on the terminal link is controlled through the three joint angles. The inverse kinematic problem is solved analytically by decomposing it into two planar sub-problems. It is shown that this problem admits up to thirty-two solutions, and an example with these many solutions is presented. The singularities of this manipulator are derived and interpreted geometrically. Finally, the workspace of this manipulator accounting for the joint limits of each X-joint is visualized.

引用

页码：32 / 42

页数：11

共 50 条

[1] Workspace and rotational capability analysis of a spatial 3-DoF parallel manipulator
Liu, XJ
Wang, JS
Wang, QM
Li, TM
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL, 2004, 14 (11) : 996 - 1003
[2] Kinematics analysis of an asymmetrical 3-DOF spatial parallel manipulator
College of Architecture Engineering, Henan University of Science and Technology, Luoyang, Henan 471003, China
Proc. - Int. Conf. Digit. Manuf. Autom., ICDMA, (506-509):
[3] Workspace and rotational capability analysis of a spatial 3-DoF parallel manipulator
LIU Xinjun 1*
2. National Astronomical Observatories
Progress in Natural Science, 2004, (11) : 60 - 67
[4] Kinematics Analysis and Optimization of a 3-DOF Planar Tensegrity Manipulator under Workspace Constraint
Dong, Yang
Ding, Jianzhong
Wang, Chunjie
Liu, Xueao
MACHINES, 2021, 9 (11)
[5] Kinematics and workspace analysis of a novel 3-DOF parallel manipulator with virtual symmetric plane
Fang, Hairong
Fang, Yuefa
Zhang, Ketao
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2013, 227 (C3) : 620 - 629
[6] Kinematics analysis of spatial 3-DOF parallel manipulator with redundant actuator
Zhou, J.-H. (jiehuazhou@126.com), 1600, Editorial Department of Journal of Sichuan University (44):
[7] Workspace analysis and optimization of a novel 3-DOF parallel manipulator
Carretero, J.A.
Nahon, M.A.
Podhorodeski, R.P.
International Journal of Robotics and Automation, 2000, 15 (04) : 178 - 188
[8] Kinematics of 3-DOF pyramid manipulator by principal screws
Haung, Z.
Wang, J.
Chinese Journal of Mechanical Engineering (English Edition), 2001, 14 (02): : 116 - 120
[9] KINEMATICS OF 3-DOF PYRAMID MANIPULATOR BY PRINCIPAL SCREWS
Huang Zhen Wang Jing Robotics Research Center
Chinese Journal of Mechanical Engineering(English Edition), 2001, (02) : 116 - 120
[10] On the workspace of a novel spatial 3 - DOF parallel manipulator
Liu, Xinjun
Wang, Jinsong
Li, Jianfeng
Gao, Feng
Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 2001, 37 (10):

← 1 2 3 4 5 →