Fracture behavior of sandstone with partial filling flaw under mixed-mode loading: Three-point bending tests and discrete element method

被引:3
|
作者
Ma, Dongdong [1 ]
Wu, Yu [1 ]
Ma, Xiao [2 ]
Hu, Xunjian [3 ]
Dong, Wenbao
Li, Decheng [1 ]
Li, Lingyu [4 ]
机构
[1] China Univ Min & Technol, State Key Lab Geomech & Deep Underground Engn, Xuzhou 221116, Peoples R China
[2] State Key Lab Struct Hlth & Safety Bridges, Wuhan 430034, Peoples R China
[3] Zhejiang Univ, Res Ctr Coastal & Urban Geotech Engn, Hangzhou 310058, Peoples R China
[4] Chinese Acad Sci, Inst Rock & Soil Mech, State Key Lab Geomech & Geotech Engn, Wuhan 430071, Peoples R China
基金
国家重点研发计划;
关键词
China; Partial filling flaw; Mixed-mode loading; Semi-circular three-point bending; Acoustic emission (AE); b-value; CONFINING PRESSURE; HYDRAULIC FRACTURE; TOUGHNESS; ROCK; COALESCENCE; STRENGTH; CRACKS; TEMPERATURE; PROPAGATION; PARAMETERS;
D O I
10.1016/j.jrmge.2023.12.034
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
The fracture behavior of natural fracture in the geological reservoir subjected to filling property, affects the crack initiation and propagation under stress perturbation. Partial filling flaws were intermediate between open fractures and filled fractures, the fracture response may be worth exploring. In this work, the effect of the filling property of sandstone with partial filling flaws on the fracture behavior was systematically investigated based on three-point bending tests and the numerical approach of discrete element method (DEM). In the laboratory, semi-circular three-point bending tests were carried out with partial filling flaws of various filling strengths. Based on this, numerical simulations were used to further investigate the effect of the filling ratio and the inclination of the partial filling flaw on the mechanical and fracture responses, and the effect of the partial filling flaw under mixed-mode loading on the fracture mechanism was elucidated coupled with acoustic emission (AE) characteristics. The obtained results showed that the increase in filling strength and filling ratio of partial filling flaw led to an increase in peak strength, with a decreasing trend in peak strength with the inclination of partial filling flaw. In terms of crack propagation pattern, the increasing filling strength of the partial filling flaw induced the transformation of the fracture mechanism toward deflection, with a tortuosity path, while the filling ratio and inclination of partial filling flaw led to fracture mechanism change from deflection to penetration and attraction, accompanied with a larger AE event source in filler. Accordingly, the b-value based on the Gutenberg-Richter equation fluctuated between 5 and 4 at low filling ratio and inclination and remained around 5 at high filling ratio and inclination of partial filling flaw. Related results may provide an application prospective for reservoir stimulation using the natural fracture system. (c) 2025 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/ 4.0/).
引用
收藏
页码:291 / 308
页数:18
相关论文
共 50 条
  • [1] Numerical simulation on fracture and acoustic emission behavior of sandstone with partial filling flaw in semi-circular three-point bending tests
    Wu, Yu
    Ma, Dongdong
    Hu, Xunjian
    Hao, Yang
    Liu, Chunhui
    Zhou, Haiyang
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2023, 125
  • [2] Experimental investigation on mode I fracture behavior of sandstone after grouting filling under three-point bending
    Wang, Wenbo
    Su, Haijian
    Zhao, Honghui
    Yu, Liyuan
    Wu, Chen
    ENGINEERING FRACTURE MECHANICS, 2023, 291
  • [3] Fracture behavior of nuclear graphite under three-point bending tests
    Chen, H. H. N.
    Su, R. K. L.
    Fok, S. L.
    Zhang, H. G.
    ENGINEERING FRACTURE MECHANICS, 2017, 186 : 143 - 157
  • [4] MIXED-MODE FRACTURE TOUGHNESS TESTING OF CONCRETE BEAMS IN THREE-POINT BENDING.
    Swartz, S.E.
    Lu, L.W.
    Tang, L.D.
    Materials and Structures/Materiaux et Constructions, 1988, 21 (121): : 33 - 40
  • [5] Measurement of the mixed mode fracture strength of green sandstone using three-point bending specimens
    Li, Yifan
    Dong, Shiming
    Pavier, Martyn J.
    GEOMECHANICS AND ENGINEERING, 2020, 20 (01) : 9 - 18
  • [6] Analysis of Mixed-Mode I/II/III Fracture Toughness Based on a Three-Point Bending Sandstone Specimen with an Inclined Crack
    Pan, Xin
    Huang, Jiuzhou
    Gan, Zhiqiang
    Dong, Shiming
    Hua, Wen
    APPLIED SCIENCES-BASEL, 2021, 11 (04): : 1 - 25
  • [7] Fracture Behavior Investigation of a Typical Sandstone Under Mixed-Mode I/II Loading Using the Notched Deep Beam Bending Method
    Luo, Y.
    Ren, L.
    Xie, L. Z.
    Ai, T.
    He, B.
    ROCK MECHANICS AND ROCK ENGINEERING, 2017, 50 (08) : 1987 - 2005
  • [8] Fracture Behavior Investigation of a Typical Sandstone Under Mixed-Mode I/II Loading Using the Notched Deep Beam Bending Method
    Y. Luo
    L. Ren
    L. Z. Xie
    T. Ai
    B. He
    Rock Mechanics and Rock Engineering, 2017, 50 : 1987 - 2005
  • [9] Crack growth in a mixed-mode loading on marble beams under three point bending
    Xeidakis, GS
    Samaras, IS
    Zacharopoulos, DA
    Papakaliatakis, GE
    INTERNATIONAL JOURNAL OF FRACTURE, 1996, 79 (02) : 197 - 208
  • [10] Mechanical behavior of SiC ceramics with single flaw under three-point bending
    Jiang, Shengqiang
    Tang, Chao
    Ye, Ying
    Liu, Sisi
    Tan, Yuanqiang
    Liu, Jingang
    Yang, Shiping
    CERAMICS INTERNATIONAL, 2021, 47 (13) : 18625 - 18634