Titanium-based brazing alloy for bonding oxide/oxide CMCs for steelmaking industry applications

被引：0

作者：

Malinverni, Carla ^{[1
]}

Casalegno, Valentina ^{[1
]}

Bertrand, Pierre ^{[2
]}

Puchas, Georg ^{[3
]}

Schaffoener, Stefan ^{[3
]}

Salvo, Milena ^{[1
]}

机构：

[1] Politecn Torino, Dept Appl Sci & Technol, Corso Duca Abruzzi 24, I-10129 Turin, Italy

[2] UTBM, Lab ICB, CNRS, UMR CNRS 6303, F-90010 Belfort, France

[3] Univ Bayreuth, Chair Ceram Mat Engn, Prof Rudiger Bormann Str 1, D-95447 Bayreuth, Germany

来源：

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2025年 / 45卷 / 07期

关键词：

Joining; Brazing; High-entropy alloy; Ceramic matrix composite; Oxide/oxide fiber composites; HIGH-ENTROPY ALLOYS; MECHANICAL-PROPERTIES; COMPOSITES; JOINT; PHASE; NB; TI; MICROSTRUCTURE; WETTABILITY; EVOLUTION;

D O I：

10.1016/j.jeurceramsoc.2025.117231

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In this work, a Ti-based high-entropy alloy was used to join Al2O3f / Al2O3-ZrO2 ceramic matrix composites, intended for use as radiant tube furnace components in energy-intensive industries such as steelmaking. The brazing cycle was conducted in a vacuum tubular furnace up to 1050 degrees C. The brazing material consisted of brazing alloy powders mixed with a water-based binder. Process parameters studied included the weight percentages of the binder, the pressure applied on the joints, and additional heat treatments to obtain successful brazed CMCs. Morphological characterizations were conducted to analyze the brazed joints and the microstructure of the filler metal. Mechanical shear tests at room temperature were performed to assess the apparent shear strength of the brazed joints, measuring 49 +/- 8 MPa of apparent shear strength for butt-configuration joints with failure mode caused by the delamination of the composite. Additionally, direct-flame exposure tests were conducted to evaluate the brazed joints in combustion environments.

引用

页数：8

共 50 条

[1] Superconductivity in titanium-based pnictide oxide compounds
Lorenz, Bernd
Guloy, Arnold M.
Chu, Paul C. W.
INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2014, 28 (19):
[2] Wear failure behaviour of titanium-based oxide coatings on a titanium alloy under impact and sliding forces
Nie, X., 1600, Elsevier Ltd (578):
[3] Wear failure behaviour of titanium-based oxide coatings on a titanium alloy under impact and sliding forces
Chen, Y.
Cheng, T.
Nie, X.
JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 578 : 336 - 344
[4] Synthesis of aligned titanium-based oxide fibre arrays
Yu, Hongquan
Song, Yang
Tang, Yanning
Li, Yue
Liu, Shimin
CERAMICS INTERNATIONAL, 2018, 44 (11) : 12149 - 12156
[5] Brazing of hexagonal boron-nitride ceramics with VT1-0 titanium alloy using a rapidly quenched titanium-based brazing alloy
NIYaU MIFI , Moscow, Russia
Weld. Int., 3 (222-226):
[6] Potentiality of the "Gum Metal" titanium-based alloy for biomedical applications
Gordin, D. M.
Ion, R.
Vasilescu, C.
Drob, S. I.
Cimpean, A.
Gloriant, T.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2014, 44 : 362 - 370
[7] Preparation and characterization of titanium-based metal oxide coated electrodes
Zhang, L. (njust_zhangli@163.com), 1600, China Ordnance Industry Corporation (34):
[8] State of the art of titanium-based brazing filler metals
Shapiro, A
Rabinkin, A
WELDING JOURNAL, 2003, 82 (10) : 36 - 43
[9] Synthesis of self-detached nanoporous titanium-based metal oxide
Hu, F.
Wen, Y.
Chan, K. C.
Yue, T. M.
Zhou, Y. Z.
Zhu, S. L.
Yang, X. J.
JOURNAL OF SOLID STATE CHEMISTRY, 2015, 229 : 78 - 86
[10] Brazing Molybdenum and Graphite with a Titanium-Based Powder Filler Metal
Fedotov, I. V.
Richman, C. E.
Sevryukov, O. N.
Suchkov, A. N.
Li, J.
Kalin, B. A.
Fedotov, V. T.
Ivannikov, A. A.
WELDING JOURNAL, 2016, 95 (09) : 357S - 361S

← 1 2 3 4 5 →