Plasma torch nozzle wear after reverse-polarity cutting of aluminum alloys

被引：0

作者：

Grinenko, A. V. ^{[1
]}

Chumaevskii, A. V. ^{[1
]}

Nikolaeva, A. V. ^{[1
]}

Utyaganova, V. R. ^{[1
]}

Gurianov, D. A. ^{[1
]}

Kolubaev, E. A. ^{[1
]}

机构：

[1] Russian Acad Sci, Inst Strength Phys & Mat Sci, Siberian Branch, Tomsk, Russia

来源：

RUSSIAN PHYSICS JOURNAL | 2024年 / 67卷 / 11期

关键词：

Aluminum alloy; Plasma cutting; Plasma torch; Surface layer; Oxidation; Pores; Defect; 538.951; 620.18; 620.19;

D O I：

10.1007/s11182-024-03352-5

中图分类号：

O4 [物理学];

学科分类号：

0702 ;

摘要：

The paper studies the layer degradation on the nozzle and electrode surface of plasma torches operating at a current with applied reverse polarity. AA5056 and AA2024 aluminum alloy sheets are used for plasma cutting. It is demonstrated that the surface of the nozzle channel and discharge chamber of the plasma torch are covered with the aluminum layer, that can be attributed to its evaporation in the cutting zone. Copper oxides and insignificant aluminum traces are observed on the surface of the discharge chamber and electrode channel. These copper oxides can almost completely block the water injection in the channel making it unusable.

引用

页码：2100 / 2105

页数：6

共 50 条

[1] Influence of Reverse-Polarity Plasma Cutting Parameters on Structure and Surface Roughness of Aluminum Alloys
Grinenko, A. V.
Chumaevskii, A. V.
Knjazhev, E. O.
Gurianov, D. A.
Sidorov, E. A.
Kolubaev, E. A.
RUSSIAN PHYSICS JOURNAL, 2024, 67 (09) : 1287 - 1293
[2] Reverse-Polarity Plasma Cutting of Thick Aluminum Alloy Plates
Grinenko, A. V.
Chumaevskii, A. V.
Knjazhev, E. O.
Gurianov, D. A.
Sidorov, E. A.
Kolubaev, E. A.
RUSSIAN PHYSICS JOURNAL, 2024, 67 (09) : 1309 - 1315
[3] Experimental and Numerical Analysis of a Reverse-polarity Plasma Torch for Plasma Atomization
Zhengxin Yin
Deping Yu
Qingbo Zhang
Shengyuan Yang
Tong Yang
Plasma Chemistry and Plasma Processing, 2021, 41 : 1471 - 1495
[4] Experimental and Numerical Analysis of a Reverse-polarity Plasma Torch for Plasma Atomization
Yin, Zhengxin
Yu, Deping
Zhang, Qingbo
Yang, Shengyuan
Yang, Tong
PLASMA CHEMISTRY AND PLASMA PROCESSING, 2021, 41 (05) : 1471 - 1495
[5] Patterns of reverse-polarity plasma torches wear during cutting of thick rolled sheets
Sidorov, Evgeny
Grinenko, Artem
Chumaevsky, Andrey
Panfilov, Alexander
Knyazhev, Evgeny
Nikolaeva, Alexandra
Cheremnov, Andrey
Rubtsov, Valery
Utyaganova, Veronika
Osipovich, Ksenia
Kolubaev, Evgeniy
OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2024, 26 (03): : 149 - 162
[6] Plasma Welding of Aluminum Alloys with the Use of Two Direct ARCS on Reverse-Polarity Current
Shchitsyn, Yu. D.
Belinin, D. S.
Shchitsyn, V. Yu.
Neulybin, S. D.
METALLURGIST, 2016, 59 (11-12) : 1234 - 1237
[7] Plasma Welding of Aluminum Alloys with the Use of Two Direct ARCS on Reverse-Polarity Current
Yu. D. Shchitsyn
D. S. Belinin
V. Yu. Shchitsyn
S. D. Neulybin
Metallurgist, 2016, 59 : 1234 - 1237
[8] Structure and properties of pure copper surface layers after reverse-polarity plasma cutting
Grinenko, A. V.
Chumaevskii, A. V.
Cheremnov, A. M.
Gurianov, D. A.
Sidorov, E. A.
Kolubaev, E. A.
RUSSIAN PHYSICS JOURNAL, 2024, 67 (11) : 2011 - 2017
[9] Experimental and numerical analysis of a novel reverse-polarity plasma torch with transferred arc hot-wall nozzle for atmospheric plasma spraying of YSZ coatings
Liu, Fangyuan
Yu, Deping
Zhang, Qingbo
Liu, Yu
Yao, Jin
SURFACE & COATINGS TECHNOLOGY, 2023, 459
[10] Influence of reverse-Polarity plasma cutting on structure and properties of pure titanium surface
Grinenko, A. V.
Chumaevskii, A. V.
Nikolaeva, A. V.
Gurianov, D. A.
Sidorov, E. A.
Kolubaev, E. A.
RUSSIAN PHYSICS JOURNAL, 2024, 67 (10) : 1569 - 1574

← 1 2 3 4 5 →