Mechanism for the Macrostructure Coarse Grain of TB6 Titanium Alloy Die Forging and Its Prediction

被引：2

作者：

Zhang Y. ^{[1
]}

Chen L. ^{[1
]}

Liu S. ^{[1
]}

Hu J. ^{[1
]}

Zhang Q. ^{[1
]}

Cui M. ^{[2
]}

Hu J. ^{[1
]}

Jin M. ^{[1
]}

机构：

[1] School of Mechanical Engineering, Yanshan University, Qinhuangdao

[2] China Second Heavy Machinery Group, Deyang Wanhang Die Forging Co., Ltd., Deyang

来源：

Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2024年 / 60卷 / 08期

关键词：

formation mechanism; macrostructure coarse grain; recrystallization; TB6 titanium alloy; visualisation model;

D O I：

10.3901/JME.2024.08.121

中图分类号：

学科分类号：

摘要：

The local area of macrostructure of TB6 titanium alloy die forging shows the flaw of coarse grain after deformation and annealing in two-phase region. By means of thermal modeling test, optical microscope(OM), micro-tensile tests and scanning electron microscope(SEM), electron black-scattered diffraction(EBSD), the microstructure characteristics and mechanical properties of "the area of macrostructure coarse grain" and "the area of macrostructure fine grain" are analyzed and compared, the formation mechanism of macrostructure coarse grain is discussed, the process condition criterion of the appearance of the macrostructure coarse grain is put forward and the prediction model is established. The results reveal that the macrostructure coarse grain is mainly distributed in the area of violent metal flow with low deformation temperature and large deformation degree. Compared with fine-grained materials, coarse-grained materials reduce the yield strength, but increase the elongation and tensile strength. After heating in the two-phase zone, the surface deformation temperature of the forging decreases during transportation, which leads to uneven temperature in the surface area. At large deformation rate, the softening degree of surface arc region is quite different, and partial dynamic recrystallization is easy to occur, resulting in dynamic recrystallized grains with large grain boundary angle(β phase). After annealing, the dynamic recrystallized grains merge the static recrystallized grains with small grain boundary angle around through grain boundary migration to form coarse grains. With the deformation temperature (T) decreases and the strain (ε ) increases, the macrostructure coarse grains appear more easily when the strain (ε ) does not exceed the critical value. The relationship between εf and T is expressed quantitatively; Taking εf as the criterion, the finite element subroutine is established through secondary development, and the visual prediction of macrostructure coarse grain of forging is realized. © 2024 Chinese Mechanical Engineering Society. All rights reserved.

引用

页码：121 / 131

页数：10

共 25 条

[1] WANG Xueli, Fuguo LI, XU Tianyu, Et al., Mechanical behavior and microstructural evolution during cyclic tensile loading-unloading deformation in metastable Ti-10V-2Fe-3Al alloy[J], Materials Science and Engineering A, 835, (2022)
[2] Delai OUYANG, Xia CUI, Shiqiang LU, Et al., Stress induced martensitic transformation of as-cast TB6 titanium alloy during hot process[J], Rare Metal Materials and Engineering, 49, 11, pp. 3776-3781, (2020)
[3] ILLARIONOV A G, TRUBOCHKIN A V，, SHALAEV A M, Et al., Isothermal decomposition of β -Solid solution in titanium alloy Ti-10V-2Fe-3Al[J], Metal Science and Heat Treatment, 58, 11-12, pp. 674-680, (2017)
[4] LIU Songliang, Application status of materials and forming technology for large aviation forgings, Heavy Casting And Forging, 2021, 6, pp. 16-18
[5] Feng XIE, MA Liang, LIU Yulei, Et al., Quantitative characterization method of microstructure characteristics of dual-phase Ti-6Al-4V alloy[J], Journal of Mechanical Engineering, 57, 12, pp. 217-225, (2021)
[6] LI Shaoqiang, GONG Zhanpeng, LI Hui, Et al., High temperature deformation behavior and dynamic recrystallization mechanism of TB18 titanium alloy[J], Rare Metal Materials and Engineering, 49, 9, pp. 3045-3051, (2020)
[7] CHEN Wei, ZHANG Xiaoyong, Et al., Microstructure evolution and mechanical properties of lamellar Ti-55511 alloy during hot rolling and annealing[J], Rare Metal Materials and Engineering, 49, 3, pp. 897-900, (2020)
[8] DONG Ruifeng, ZHANG Xiaoyang, Hongchao KOU, Et al., Texture evolution associated with the preferential recrystallization during annealing process in a hot-rolled near β titanium alloy[J], Journal of Materials Research and Technology, 12, pp. 63-73, (2021)
[9] ZHANG Qifei, JIN Miao, CHEN Lei, Et al., Formation mechanism and prediction model of macro clear grains in near α Titanium alloy aviation forgings[J], Journal of Mechanical Engineering, 57, 8, pp. 133-145, (2021)
[10] LEVKULICH N C, SEMIATIN S L, PAYTON E J, Et al., An investigation of the development of coarse grains during β annealing of hot-forged Ti-6Al-4V[J], Metallurgical and Materials Transactions A, 52, 4, pp. 1353-1367, (2021)

← 1 2 3 →