Long afterglow epoxidized soybean oil polymer composites with reversible dynamic cross-linking for intelligent coating

被引:0
|
作者
Hu, Jiaman [1 ]
Wang, Zihao [1 ]
Yang, Minglin [1 ]
Yu, Chuansong [1 ]
Li, Siyu [1 ]
Miao, Yinggang [2 ,3 ,4 ]
Quan, Xiangqian [5 ,6 ]
Liu, Jize [1 ]
Shao, Shiyang [1 ]
机构
[1] School of Materials Science and Engineering, Hainan University, Hainan, Haikou,570228, China
[2] Shaanxi Key Laboratory of Impact Dynamics and its Engineering Application, School of Aeronautics, Northwestern Polytechnical University, Xi'an,710072, China
[3] Joint International Research Laboratory of Impact Dynamics and its Engineering Applications, School of Aeronautics, Northwestern Polytechnical, University, Xi'an,710072, China
[4] National Key Laboratory of Strength and Structural Integrity, Xi'an,710072, China
[5] Institute of Deep-Sea Science and Engineering, Chinese Academy of Sciences, Sanya,572000, China
[6] Department of Mechanical and Aerospace Engineering, Scripps Institution of Oceanography, University of California, San Diego,CA,92093, United States
关键词
Advanced functions - Afterglow luminescence - Cross linking - High performance coatings - Hydrogen bonding network - Long afterglow - Multiple function - Polymer composite - Self-healing - Single composites;
D O I
10.1039/d4py00857j
中图分类号
学科分类号
摘要
High-performance coatings with advanced functions such as long afterglow luminescence and self-healing have attracted great interest around the world, but the integration of these desirable multiple functions into a single composite system still remains a great challenge. Herein, an intelligent coating based on epoxidized soybean oil and modified long afterglow powders is presented for a self-healing intelligent coating. By constructing a dynamic hydrogen bonding network between natural polyphenols and epoxidized soybean oil, the obtained composites show desirable adhesive performances and self-healing ability: the shear strength of the obtained coating is able to reach 313.96 kPa while the self-healing efficiency was about 81.29% after a damage-healing process. Moreover, the introduction of SiO2-modified SrAl2O4:Eu2+,Dy3+ powders endows the intelligent coating with long afterglow ability, which greatly benefits the visualized monitoring of small cracks. Meanwhile, the obtained bio-sourced composites could be degraded under anaerobic composting conditions within 5 days, and after degradation the long afterglow powders could be separated and recycled with almost consistent performance (luminescent intensity remains 95.19%) in contrast to the original powders. This study offers valuable examples and new insights for the high-value utilization of bio-based materials. © 2024 The Royal Society of Chemistry.
引用
下载
收藏
页码:4982 / 4992
相关论文
共 50 条
  • [1] Effect of Selected Thiols on Cross-Linking of Acrylated Epoxidized Soybean Oil and Properties of Resulting Polymers
    Kasetaite, Sigita
    De la Flor, Silvia
    Serra, Angels
    Ostrauskaite, Jolita
    POLYMERS, 2018, 10 (04)
  • [2] KINETICS OF CROSS-LINKING OF POLYMER CEMENT COMPOSITES
    BOIKO, GP
    JOURNAL OF APPLIED CHEMISTRY OF THE USSR, 1987, 60 (07): : 1459 - 1464
  • [3] Disulfide group influence on the surface properties and reversible cross-linking functionalization of natural polymer coating
    Xue, Hanyu
    Ding, Xiaohong
    Zhang, Yuchi
    Li, Xinzhong
    Xia, Jianrong
    Lin, Qi
    POLYMER BULLETIN, 2021, 78 (11) : 6707 - 6721
  • [4] Disulfide group influence on the surface properties and reversible cross-linking functionalization of natural polymer coating
    Hanyu Xue
    Xiaohong Ding
    Yuchi Zhang
    Xinzhong Li
    Jianrong Xia
    Qi Lin
    Polymer Bulletin, 2021, 78 : 6707 - 6721
  • [5] Manufacturing of Thermally Remoldable Blends from Epoxidized Soybean Oil and Poly(lactic acid) via Dynamic Cross-Linking in a Twin-Screw Extruder
    Liu, Wendi
    Qiu, Jianhui
    Fei, Ming-en
    Qiu, Renhui
    Sakai, Eiichi
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2018, 57 (22) : 7516 - 7524
  • [6] Microcrystalline cellulose as reactive reinforcing fillers for epoxidized soybean oil polymer composites
    He, Ming
    Zhou, Jianjun
    Zhang, Huan
    Luo, Zhenyang
    Yao, Jianfeng
    JOURNAL OF APPLIED POLYMER SCIENCE, 2015, 132 (36)
  • [7] From Epoxidized Linseed Oil to Bioresin: An Overall Approach of Epoxy/Anhydride Cross-Linking
    Pin, Jean-Mathieu
    Sbirrazzuoli, Nicolas
    Mija, Alice
    CHEMSUSCHEM, 2015, 8 (07) : 1232 - 1243
  • [8] Synthesis and Thermal Cross-Linking Study of Partially-Aminated Epoxidized Linseed Oil
    Lopez Tellez, G.
    Vigueras-Santiago, E.
    Hernandez-Lopez, S.
    Bilyeu, Bryan
    DESIGNED MONOMERS AND POLYMERS, 2008, 11 (05) : 435 - 445
  • [9] KINETICS OF CROSS-LINKING OF POLYMER-CEMENT COMPOSITES.
    Boiko, G.P.
    1600, (60):
  • [10] Research on Toughening Polylactic Acid by an Epoxy Soybean Oil Curing Network Based on Dynamic Cross-Linking
    Zhao, Feng
    Xu, Ruilong
    Zhang, Xu
    Zheng, Jiawang
    Liu, Wei
    Zhao, Shuai
    Li, Lin
    ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 2024, 12 (30): : 11347 - 11360