Residual Stress/Strain Analysis of NEPE Propellant under Curing and Cooling

被引：0
|
作者：
Zhou D.-M. [1 ]
Xie X.-Y. [1 ]
Wang R.-M. [1 ]
Liu X.-Y. [2 ]
Hui B.-Q. [1 ]
机构：
[1] School of Mechatronic Engineering, North University of China, Taiyuan
[2] School of Aerospace Engineering, Beijing Institute of Technology, Beijing
来源：
Hanneng Cailiao/Chinese Journal of Energetic Materials | 2024年 / 32卷 / 02期
关键词：
curing and cooling; curing degree field; nitrate ester plasticized polyether（NEPE）propellant; resid⁃ ual stress; temperature field;
D O I：
10.11943/CJEM2023224
中图分类号：
学科分类号：
摘要：
To study the formation mechanism of residual stress/strain of the nitrate ester plasticized polyether（NEPE）propellant grain during the curing and cooling stages，the temperature field，curing degree field and stress/strain field of the propellant were numerically analyzed via ABAQUS finite element software. The results show that there are temperature gradient and curing rate gradient in the NEPE propellant grain during the curing process at 50 ℃. The temperature and the curing rate are notably higher at the center of the grain，and they eventually reach a consensus at the end of curing. The temperature difference in the propel⁃ lant does not affect the final residual stress/strain. The total residual stress/strain during curing and cooling obey the principle of stress/strain superposition，and they are mainly composed of the curing shrinkage stress/strain and thermal stress/strain during cooling. For the total residual stress，the proportions of the two stages are approximately 20% and 80%，respectively，and for the total residual strain，the proportions are about 30% and 70%，respectively. Compared with the traditional method，the residual stress/strain calculated in this study have the same distribution characteristics，but the values are smaller. © 2024 Institute of Chemical Materials, China Academy of Engineering Physics. All rights reserved.
引用
收藏
页码：193 / 203
页数：10
相关论文
共 30 条
  • [1] ZHU Zhi, CAI E., A finite element analysis of three-di⁃ mensional temperature and stress fields for solid rocket motor grain［J］, Journal of Propulsion Technology, 18, 2, pp. 21-26, (1997)
  • [2] XU Xin-qi, HU Ming-yong, Transient temperature and stress analysis for thermos⁃viscoelastic SRM grains［J］, Machine De‑ sign and Research, 20, 2, pp. 69-71, (2004)
  • [3] PAN Dian-hua, HU Ming-yong, Influence of solid rocket en⁃ gine material parameters when solidifying［J］, Journal of Yantai University（Natural Science and Engineering Edition）, 19, 1, pp. 63-67, (2006)
  • [4] WEI Shi-feng, Structural integrity analysis of charge under tem⁃ perature and internal pressure［D］, (2006)
  • [5] SUN Xiao-fei, Xuan LIU, ZHAN Ming-ming, Et al., Research progress in influence of curing system on mechanical perfor⁃ mance of PET type composite solid propellant［J］, Chemical Propellants & Polymeric Materials, 18, 4, pp. 12-18, (2020)
  • [6] XING Yao, JIN Guang, Et al., Compre⁃ hensive property tests and service life evaluation for solid rock⁃ et motors［J］, Journal of Propulsion technology, 25, 2, pp. 176-179, (2004)
  • [7] ZHENG Qi-long, Curing system of azide binders with epoxides and its application in propellant ［D］, (2019)
  • [8] QIAO Wei, Et al., Numerical simulation and constitutive models evaluation of residual stresses and induced deformations of composite structures［J］, Materials Reports, 33, 24, pp. 4193-4198, (2019)
  • [9] YANG Fan, WANG Yu, MA Bao-ji, Et al., Residual stress⁃strain and numerical simulation of deformation on fiber optic cable package curing［J］, Journal of Projectiles，Rockets，Missiles and Guidance, 43, 2, pp. 12-19, (2023)
  • [10] LIU Shi, WANG Yan-ru, Analysis of solidification shrink⁃ age stress of solid rocket motor grain［C］//2000 National Aca⁃ demic Exchange Conference on Solid Rocket Engine Design Technology, pp. 325-329, (2000)
123