INFLUENCE OF COLD DEFORMATION AND LOW-TEMPERATURE TEMPERING ON MECHANICAL PROPERTIES OF DUAL PHASE FERRITIC-MARTENSITIC STEELS.

被引：2
|
作者：
Bortsov, A.N. [1 ]
Fonshtein, N.M. [1 ]
机构：
[1] Central Scientific-Research Inst for, Ferrous Metallurgy, Moscow, USSR, Central Scientific-Research Inst for Ferrous Metallurgy, Moscow, USSR
来源：
Soviet materials science | 1984年 / 20卷 / 02期
关键词：
HEAT TREATMENT - Applications - STEEL - Mechanical Properties;
D O I：
10.1007/BF00721340
中图分类号：
学科分类号：
摘要：
Known investigations of dual phase ferritic-martensitic steels contain very limited information on the characteristics of toughness and cold resistance, the role of which increases with an increase in cross section of the parts used. This paper was done on laboratory heats of steels. The base for the tests was type 10Kh1MF steel, which was heat treated to form ferritic-pearlitic and ferritic-martensitic structures. The ferritic-pearlitic structure was obtained by annealing at 950 degree C. The treatment for the ferritic-martensitic structure consisted of preliminary normalizing (950 degree C, 1 h) subsequent hardening (790 degree C for 30 min, water quench) from the intercritical temperature range.
引用
收藏
页码：142 / 147
相关论文
共 50 条
  • [1] TWO-PHASE FERRITIC-MARTENSITIC STEELS.
    Golovanenko, S.A.
    Fonshtein, N.M.
    Metal Science and Heat Treatment (English Translation of Metallovedenie i Termicheskaya Obrabotka, 1984, 26 (11-12): : 811 - 816
  • [2] Plasticity of Ferritic-martensitic Two-phase Steels.
    Uggowitzer, Peter
    Stuewe, Hein Peter
    Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 1982, 73 (05): : 277 - 285
  • [3] INFLUENCE OF MARTENSITE MORPHOLOGY ON DEFORMATION CHARACTERISTICS OF FERRITIC-MARTENSITIC STEELS
    RAU, RHG
    GUPTE, KA
    ACTA STEREOLOGICA, VOL 6, SUPP 3, PARTS 1-2, 1987, 6 : 479 - 483
  • [4] The mechanical properties and microstructure of the OPTIMAX series of low activation ferritic-martensitic steels
    Baluc, N
    Schäublin, R
    Bailat, C
    Paschoud, F
    Victoria, M
    JOURNAL OF NUCLEAR MATERIALS, 2000, 283 (283-287) : 731 - 735
  • [5] Low cycle fatigue properties of ODS ferritic-martensitic steels at high temperature
    Ukai, S.
    Ohtsuka, S.
    JOURNAL OF NUCLEAR MATERIALS, 2007, 367 (SPEC. ISS.) : 234 - 238
  • [6] THE EFFECT OF IRRADIATION ON THE MECHANICAL-PROPERTIES OF FERRITIC-MARTENSITIC STEELS
    VANDERMEULEN, W
    SNYKERS, M
    RADIATION EFFECTS AND DEFECTS IN SOLIDS, 1987, 101 (1-4): : 221 - 236
  • [7] The Correlation Between the Microstructural Parameters and Mechanical Properties of Reduced Activation Ferritic-Martensitic (RAFM) Steel: Influence of Roll Deformation and Medium Temperature Tempering
    Mao, Chunliang
    Liu, Chenxi
    Liu, Guowang
    Yu, Liming
    Li, Huijun
    Dong, Ji
    Liu, Yongchang
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2021, 52 (01): : 119 - 128
  • [8] MECHANICAL-PROPERTIES OF AUSTENITIC STEELS AFTER LOW-TEMPERATURE DEFORMATION AND TEMPERING
    ROZHKOVA, SB
    OSINTSEVA, AL
    METAL SCIENCE AND HEAT TREATMENT, 1975, 17 (1-2) : 160 - 163
  • [9] Formation and oxidation performance of low-temperature pack aluminide coatings on ferritic-martensitic steels
    Bates, B. L.
    Wang, Y. Q.
    Zhang, Y.
    Pint, B. A.
    SURFACE & COATINGS TECHNOLOGY, 2009, 204 (6-7): : 766 - 770
  • [10] Formation of Aluminide Coatings on Ferritic-Martensitic Steels by a Low-Temperature Pack Cementation Process
    Wang, Y. Q.
    Zhang, Y.
    Wilson, D. A.
    SURFACE & COATINGS TECHNOLOGY, 2010, 204 (16-17): : 2737 - 2744
12345