Methodology of testing irradiated specimens for resistance to brittle fracture

被引：0
|
作者：
Vasnin, A.M. [1 ]
Garachuk, O.K. [1 ]
Karasev, V.S. [1 ]
Mamchich, S.D. [1 ]
Rivkin, E.Yu. [1 ]
Rodin, M.E. [1 ]
机构：
[1] Ukraine Academy of Sciences, Russia
来源：
Industrial laboratory | 1988年 / 54卷 / 04期
关键词：
Materials Testing - Fracture - Steel Testing - Crack Propagation;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Investigation of the influence of irradiation on the critical opening of the crack (COC) is performed on flat rectangular specimens with an edge crack for three-point bending tests which are fabricated from rolled steel 12KhGNMF. The radiation stability of this steel was estimated by results of tensile and shock bending tests. The influence of a different specimen irradiation temperature on the value of the critical crack opening was estimated during the tests. Specimens that were irradiated at the maximal (280°C) and minimal (240°C) temperatures were tested at identical temperatures. The data obtained showed that the difference in irradiation temperature in the 240-280°C range does not influence the resistance to brittle fracture for the steel 12KhGNMF.
引用
收藏
页码：517 / 520
相关论文
共 50 条
  • [1] METHODOLOGY OF TESTING IRRADIATED SPECIMENS FOR RESISTANCE TO BRITTLE-FRACTURE
    VASNIN, AM
    GARACHUK, OK
    KARASEV, VS
    MAMCHICH, SD
    RIVKIN, EY
    RODIN, ME
    INDUSTRIAL LABORATORY, 1988, 54 (05): : 517 - 520
  • [2] FACILITY FOR FRACTURE TESTING OF IRRADIATED SPECIMENS
    VAINER, LA
    NAUMENKO, GA
    PARSHIN, AM
    POKROVSKII, VV
    SOVIET ATOMIC ENERGY, 1978, 45 (02): : 810 - 812
  • [3] EVALUATION OF THE BRITTLE-FRACTURE RESISTANCE OF THICK PLATES OF A STRUCTURAL-STEEL IN TESTING SPECIMENS WITH A DEPOSIT
    ODESSKII, PD
    KUDAIBERGENOV, NB
    BARYSHEV, VM
    INDUSTRIAL LABORATORY, 1993, 59 (09): : 872 - 878
  • [4] SPECIMEN FOR TESTING THE RESISTANCE TO FATIGUE AND BRITTLE-FRACTURE OF FASTENING MATERIALS
    KARZOV, GP
    SMIRNOV, VI
    INDUSTRIAL LABORATORY, 1979, 45 (03): : 345 - 350
  • [5] THE STATISTICS OF BRITTLE-FRACTURE OF SMALL SPECIMENS
    HU, XZ
    COTTERELL, B
    MAI, YW
    PHILOSOPHICAL MAGAZINE LETTERS, 1988, 57 (02) : 69 - 73
  • [6] BRITTLE-FRACTURE RESISTANCE
    GULYAEV, AP
    METAL SCIENCE AND HEAT TREATMENT, 1992, 34 (1-2) : 110 - 118
  • [7] Review of Low-Constraint Fracture Resistance Testing with SENT Specimens
    Zhu, Xian-Kui
    McGaughy, Tom
    Orth, Fabian
    Jennings, Jon
    33RD INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2014, VOL 5, 2014,
  • [8] METHOD OF MECHANICAL TESTING OF SPECIMENS OF BRITTLE MATERIALS
    EFIMOV, OY
    SAKHNO, AI
    MAMLEEV, RF
    INDUSTRIAL LABORATORY, 1989, 55 (06): : 733 - 734
  • [9] TESTING WELD METAL FOR BRITTLE FRACTURE
    NICHOLS, RW
    METAL CONSTRUCTION AND BRITISH WELDING JOURNAL, 1969, 1 (01): : 54 - &
  • [10] STABLE FRACTURE TESTING OF BRITTLE MATERIALS
    Baudin, C.
    Garcia-Prieto, A.
    MECHANICAL PROPERTIES AND PERFORMANCE OF ENGINEERING CERAMICS AND COMPOSITES XI, 2017, 37 (02): : 13 - 27
12345