Effect of evaporation cooling of gas turbine blades on design, efficiency and economy

被引:0
|
作者
Ausmeier, Sabine [1 ]
Bitterlich, Walter [1 ]
Winske, Paul [1 ]
机构
[1] Energy and Power Station Technology, University of Essen, Universitätsstr. 15, 45117 Essen, Germany
来源
| 2001年 / Belgian Soc. of Mechanical and Environ. Engineering卷 / 46期
关键词
Compressors - Cooling - Economics - Energy efficiency - Evaporation - Gas turbines - Steam generators - Thermal cycling - Thermal expansion;
D O I
暂无
中图分类号
学科分类号
摘要
The cooling of gas turbine blades with air from the compressor caused a decisive technology jump to enable higher inlet temperatures and thus efficiencies. A further step could be the cooling with evaporating water in a closed cycle. Thereby, small water mass flow rates are needed because of the efficient cooling performance. This cooling is optimum in a combined cycle with superheating of the cooling steam in the heat recovery steam generator and expansion in the steam turbine.
引用
收藏
相关论文
共 50 条
  • [1] COOLING OF GAS-TURBINE BLADES
    MUKHERJEE, DK
    BROWN BOVERI REVIEW, 1977, 64 (01): : 47 - 51
  • [2] Improved cooling of gas turbine blades
    Rusevljan, M
    Guzovic, Z
    Josipovic, J
    THERMAL SCIENCES 2000, 2000, : 459 - 466
  • [3] Optimisation techniques applied to the design of gas turbine blades cooling systems
    Bucchieri, Gianlorenzo
    Galbiati, Massimo
    Coutandin, Daniele
    Zecchi, Stefano
    Proceedings of the ASME Turbo Expo 2006, Vol 6, Pts A and B, 2006, : 1395 - 1405
  • [4] A numerical procedure to design internal cooling of gas turbine stator blades
    Carcasci, C
    Facchini, B
    REVUE GENERALE DE THERMIQUE, 1996, 35 (412): : 257 - 268
  • [5] Process and analysis of cooling structure design for gas turbine rotor blades with film cooling
    Luo, Lei
    Chen, Shuo
    Liu, Wei
    Wang, Songtao
    Wang, Zhongqi
    Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2015, 35 (16): : 4112 - 4121
  • [6] COOLING IMPROVEMENT OF GAS TURBINE ROTARY BLADES
    Rasimarzabadi, Faezeh
    Kamalimoghadam, Ramin
    Najafi, Mahmoud
    Mohammadi, MohammadReza
    Fard, Nasrin Sahranavard
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, VOL 7C, 2020,
  • [7] Effect of Cooling Parameters on the Thermostressed State of Gas Turbine Nozzle Blades
    B. S. Karpinos
    V. M. Kulish
    Strength of Materials, 2017, 49 : 412 - 421
  • [8] AIR COOLING OF GAS-TURBINE BLADES
    FAVORSKII, ON
    KOPELEV, SZ
    THERMAL ENGINEERING, 1981, 28 (08) : 435 - 438
  • [9] Effect of Cooling Parameters on the Thermostressed State of Gas Turbine Nozzle Blades
    Karpinos, B. S.
    Kulish, V. M.
    STRENGTH OF MATERIALS, 2017, 49 (03) : 412 - 421
  • [10] COOLING EFFICIENCY ENHANCEMENT USING IMPINGEMENT COOLING TECHNIQUE FOR TURBINE BLADES
    Rajamani, Keerthivasan
    Ganesh, Madhu
    Paramanandam, Karthikeyan
    Jayamurugan, Chandiran
    Narayanan, Sridharan R.
    Srinivasan, Balamurugan
    Chandra, A.
    PROCEEDINGS OF THE ASME GAS TURBINE INDIA CONFERENCE, 2013, 2014,