Operational Experience with the Thermocoil Process for the Production of High Strength Reinforcing Steel Bars.

被引:0
|
作者
Brennecke, Norbert [1 ]
Guenther, Ernst [1 ]
机构
[1] Sket VEB, Schwermaschinenbau-Kombinat, 'Ernst, Thaelmann', Magdeburg, East Ger, Sket VEB Schwermaschinenbau-Kombinat, 'Ernst Thaelmann', Magdeburg, East Ger
来源
Stahl und Eisen | 1987年 / 107卷 / 20期
关键词
ROLLING MILL PRACTICE - Bars;
D O I
暂无
中图分类号
学科分类号
摘要
According to the Thermocoil process, the wire rod is subjected to a short-time intensive cooling in newly developed pressure-water cooling tubes immediately after a high and rapid deformation in the rolling block, and subsequently fanned out by a loop layer on a moving carrier after the equalization of the surface and core zone temperatures. This results in a fine-grained ferritic-pearlitic core structure and a tempered martensitic surface zone.
引用
收藏
页码:65 / 69
相关论文
共 50 条
  • [1] OPERATIONAL EXPERIENCE WITH THE THERMOCOIL PROCESS FOR THE PRODUCTION OF HSLA REINFORCING STEEL BARS
    BRENNECKE, N
    GUNTHER, E
    STAHL UND EISEN, 1987, 107 (20): : 947 - 951
  • [2] FUNDAMENTALS OF THERMOCOIL TECHNIQUE FOR THE PRODUCTION OF HIGH-STRENGTH REINFORCING BARS IN WIRE ROD MILLS
    BRENNECKE, N
    GUNTHER, E
    STEEL RESEARCH, 1987, 58 (11): : 508 - 513
  • [3] AUTOMATIC GAS PRESSURE WELDING PROCESS FOR REINFORCING STEEL BARS.
    Yokokawa, Takao
    Takano, Shigeo
    Shimmi, Yoshikazu
    Isa, Takayoshi
    1978, 63 (09): : 35 - 41
  • [4] REINFORCED CONCRETE MEMBERS WITH HIGH STRENGTH STEEL BARS.
    Okada, Kiyoshi
    Kobayashi, Kazuo
    Miyagawa, Toyoaki
    Aoki, Makoto
    1985, 6 : 567 - 574
  • [5] BEARING STRENGTH AND STIFFNESS OF CONCRETE UNDER REINFORCING BARS.
    Soroushian, Parviz
    Obaseki, Kineuwa
    Rojas, Maximo C.
    1600, (84):
  • [6] Production of high-strength reinforcing bars
    Yur'ev, A.B.
    Chinokalov, V.Ya.
    Zezikov, M.V.
    Efimov, O.Yu.
    Klepikov, A.G.
    Stal', 2004, (05): : 88 - 89
  • [7] SELECTION AND DEVELOPMENT OF STEELS FOR IN-LINE LARGE-SCALE PRODUCTION OF HIGH-STRENGTH REINFORCING BARS.
    Kalmykov, V.V.
    1987, 1 (01): : 47 - 49
  • [8] Splice strength of large diameter, high strength steel reinforcing bars
    Hassan, Tarek K.
    Lucier, Gregory W.
    Rizkalla, Sami H.
    CONSTRUCTION AND BUILDING MATERIALS, 2012, 26 (01) : 216 - 225
  • [9] Corrosion effects on the mechanical properties of reinforcing steel bars. Fatigue and σ-ε behavior
    Fernandez, Ignasi
    Miguel Bairan, Jesus
    Mari, Antonio R.
    CONSTRUCTION AND BUILDING MATERIALS, 2015, 101 : 772 - 783
  • [10] EXPERIMENTAL STUDIES ON SEISMIC BEHAVIOR OF HIGH STRENGTH CONCRETE COLUMNS LATERALLY REINFORCED WITH HIGH STRENGTH STEEL BARS.
    Sugano, Shunsuke
    Nagashima, Toshio
    Kimura, Hideki
    Tamura, Akio
    Takenaka Technical Research Report, 1987, (38): : 35 - 53