RESISTANCE TO CREVICE CORROSION OF SPRAY AND FUSED Ni-Cr-Mo ALLOY COATINGS.

被引：0
|
作者：
Ishiguro, Juichi
Kitashima, Nobumitsu
机构：
来源：
Boshoku gijutsu | 1982年 / 31卷 / 06期
关键词：
D O I：
10.3323/jcorr1974.31.6_394
中图分类号：
学科分类号：
摘要：
To suppress crevice corrosion of austenitic stainless steel used in sea water, the effect of Cr and Mo on corrosion resistance of Ni base ternary cast alloys was studied. A fused coating of Ni-31. 9% Cr-8. 0% Mo-1. 9% Si-1. 8% B alloy did not reveal cyclic polarization in a 3% NaCl solution. In spraying Ni-33. 7% Cr-19. 6% Mo-2. 2% B powder on the sprayed layer, good correspondence was achieved between cyclic polarization behavior and the results of 6 months immersion in sea water.
引用
收藏
页码：394 / 399
相关论文
共 50 条
  • [1] Effect of Polymer and Ceramic Crevice Formers on the Crevice Corrosion of Ni-Cr-Mo Alloy 22
    Shan, X.
    Payer, J. H.
    CORROSION, 2010, 66 (10)
  • [2] Corrosion resistance of a new, wrought Ni-Cr-Mo alloy
    Crook, P
    Caruso, ML
    Kingseed, DA
    MATERIALS PERFORMANCE, 1997, 36 (03) : 49 - 52
  • [3] Crevice Corrosion Repassivation of Ni-Cr-Mo Alloys by Cooling
    Hornus, Edgar C.
    Rodriguez, Martin A.
    Carranza, Ricardo M.
    Rebak, Raul B.
    CORROSION, 2019, 75 (06) : 604 - 615
  • [4] Mechanical properties and corrosion resistance of a novel Ni-Cr-Mo alloy
    Huang, Ping
    Liu, Rong
    Wu, Xi. J.
    Yao, Matthew X.
    ADVANCED ENGINEERING MATERIALS, 2007, 9 (1-2) : 60 - 64
  • [5] IMPROVED NI-CR-MO ALLOY FOR CORROSION SERVICE
    HODGE, FG
    KIRCHNER, RW
    CORROSION, 1976, 32 (08) : 332 - 336
  • [6] Comparison of Crevice Corrosion of Fe-Based Amorphous Metal and Crystalline Ni-Cr-Mo Alloy
    X. Shan
    H. Ha
    J.H. Payer
    Metallurgical and Materials Transactions A, 2009, 40 : 1324 - 1333
  • [7] Comparison of Crevice Corrosion of Fe-Based Amorphous Metal and Crystalline Ni-Cr-Mo Alloy
    Shan, X.
    Ha, H.
    Payer, J. H.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (06): : 1324 - 1333
  • [8] Effect of iron dilution on corrosion resistance of Ni-Cr-Mo alloy cladding
    Gittos, MF
    Gooch, TG
    BRITISH CORROSION JOURNAL, 1996, 31 (04): : 309 - 314
  • [9] Effect of temperature on the crevice corrosion resistance of Ni-Cr-Mo alloys as engineered barriers of nuclear repositories
    Hornus, E. C.
    Rodriguez, M. A.
    11TH INTERNATIONAL CONGRESS ON METALLURGY & MATERIALS SAM/CONAMET 2011, 2012, 1 : 251 - 258
  • [10] The Role of Alloying Elements on the Crevice Corrosion Behavior of Ni-Cr-Mo Alloys
    Ebrahimi, N.
    Jakupi, P.
    Noel, J. J.
    Shoesmith, D. W.
    CORROSION, 2015, 71 (12) : 1441 - 1451
12345