Aging behavior of an Al-Li-Cu-Mg-Zr alloy

被引:0
|
作者
Ohmori, Yasuya [1 ]
Ito, Sadayoshi [1 ]
Nakai, Kiyomichi [1 ]
机构
[1] Ehime Univ, Ehime Prefecture, Japan
关键词
Aging of materials - Crystal atomic structure - Crystal orientation - Dissolution - Electric conductivity measurement - Grain boundaries - High resolution electron microscopy - Metallography - Phase separation - Precipitation (chemical) - Thermal effects - Transmission electron microscopy;
D O I
暂无
中图分类号
学科分类号
摘要
The aging processes in an Al-Li-Cu-Mg-Zr alloy have been examined by means of electrical resistivity measurements and high-resolution transmission electron microscopy coupled with an image-processing system. The specimens, quenched in iced brine after solution treatment, were reheated at a constant rate of 1 K/min up to 773 K. Six reactions were clearly separated in the temperature derivative of the resistivity/temperature curve, i.e., there was a slight increase at temperatures around 333 K, a large decrease at around 368 K, a significant decrease at around 448 K, a large increase at around 538 K, a remarkable decrease at around 568 K, and a final broad increase at around 623 K. Each reaction observed by the electrical resistivity measurement was examined metallographically. In the as-quenched specimen, spherical undissolved β′ (AlZr3 L12 structure) particles dispersed, but the matrix was already ordered congruently into an L12 structure. The first reaction at around 333 K is probably due to the increase of the degree in the congruent ordering, but the second one, at around 368 K, is thought to rise from the rearrangements of antiphase domain boundaries (APDBs) such as the partition of Li atoms between an APDB and the matrix, the APDBs lying parallel to the {100} and {110} planes. Reheating to temperatures around 448 K induces the phase separation, with well-defined interfaces into Li-rich, ordered δ′ (L12) and Li-poor, less-ordered regions, and the Ostwald ripening of the ordered regions follows. The reactions at 538, 568, and 633 K were identified as the dissolution of δ′ particles into the matrix, the precipitation of δ (AlLi B32) and S′ (Al2CuMg orthorhombic) particles, and the dissolution of both δ and S′ compounds into the matrix, respectively.
引用
收藏
页码:741 / 749
相关论文
共 50 条
  • [1] Aging behavior of an Al-Li-Cu-Mg-Zr alloy
    Yasuya Ohmori
    Kiyomichi Nakai
    Sadayoshi Ito
    Metallurgical and Materials Transactions A, 1999, 30 : 741 - 749
  • [2] Aging behavior of an Al-Li-Cu-Mg-Zr alloy
    Ohmori Y.
    Ito S.
    Nakai K.
    Metallurgical and Materials Transactions A, 1999, 30 (13) : 741 - 749
  • [3] Aging behavior of an Al-Li-Cu-Mg-Zr alloy
    Ohmori, Y
    Nakai, K
    Ito, S
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1999, 30 (03): : 741 - 749
  • [4] Aging behavior of an Al-Li-Cu-Mg-Zr alloy
    Ohmori, Yasuya
    Ito, Sadayoshi
    Nakai, Kiyomichi
    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1999, 30 (13): : 741 - 749
  • [5] Effect of natural aging on the microstructure of Al-Li-Cu-Mg-Zr alloy
    Gu, Y.J.
    Zhou, T.T.
    Zhang, L.
    Zhang, Y.G.
    Chen, C.Q.
    Cailiao Gongcheng/Journal of Materials Engineering, 2001, (01):
  • [6] The aging feature of Al-Li-Cu-Mg-Zr alloy containing Sc
    Tan, CY
    Zheng, ZQ
    Xia, CQ
    Liang, Y
    JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 2000, 7 (02): : 65 - 67
  • [7] The aging feature of Al-Li-Cu-Mg-Zr alloy containing Sc
    Cheng-yu Tan
    Zi-qiao Zheng
    Chang-qing Xia
    Ying Liang
    Journal of Central South University of Technology, 2000, 7 : 65 - 67
  • [8] OVERHEAT OF AL-LI-CU-MG-ZR ALLOY
    WU, YL
    QIANG, J
    WANG, SC
    LIU, BC
    MATERIALS SCIENCE AND TECHNOLOGY, 1993, 9 (02) : 114 - 117
  • [9] THERMAL-OXIDATION BEHAVIOR OF AN AL-LI-CU-MG-ZR ALLOY
    AHMAD, M
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1987, 18 (04): : 681 - 689
  • [10] Cyclic deformation behavior of ECAP Al-Li-Cu-Mg-Zr alloy
    Liu, SM
    Wang, ZG
    ACTA METALLURGICA SINICA, 2004, 40 (03) : 225 - 229