METALLOGRAPHIC EXAMINATIONS ON SILVER/METAL OXIDE CONTACT MATERIALS IN ELECTRONIC ENERGY TECHNOLOGY.

被引：0

作者：

Woerle, Brigitte ^{[1
]}

Saeger, Karl E. ^{[1
]}

机构：

[1] Doduco KG, Pforzheim, West Ger, Doduco KG, Pforzheim, West Ger

来源：

Praktische Metallographie/Practical Metallography | 1985年 / 22卷 / 11期

关键词：

COMPOSITE MATERIALS - Microstructure - MICROSCOPIC EXAMINATION - SILVER AND ALLOYS - Metallic Matrix Composites;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Composite materials based on silver with included oxide particles have been used for many years as contacts for low voltage power engineering applications, that is for the switching of currents in the region from 50 to 4000 A at voltages of mainly 220 and 380 V. The microstructures of the different silver/metal oxide materials vary according to their composition and method of production. Due to the fact that the microstructure of the contact material has considerable influence on the properties relevant to its use, metallography has proved to be an extremely important tool in the development and quality control of this type of material. The variety of information which can be obtained with the help of metallographic investigations is described in this paper, using typical examples.

引用

页码：536 / 546

共 50 条

[1] SILVER-METAL OXIDE CONTACT MATERIALS FABRICATED BY SPRAY COPRECIPITATION
STEWART, TI
DOUGLAS, P
MCCARTHY, JP
SCHULTE, AJ
IEEE TRANSACTIONS ON PARTS HYBRIDS AND PACKAGING, 1977, 13 (01): : 35 - 41
[2] COMPARISON OF PROPERTIES OF SILVER-METAL OXIDE ELECTRICAL CONTACT MATERIALS
Cosovic, V.
Talijan, N.
Zivkovic, D.
Minic, D.
Zivkovic, Z.
JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2012, 48 (01) : 131 - 141
[3] PROCESSING AND PROPERTIES OF SILVER-METAL OXIDE ELECTRICAL CONTACT MATERIALS
Talijan, Nadezda M.
Cosovic, Vladan R.
Cosovic, Aleksandar R.
Zivkovic, Dragana T.
METALLURGICAL & MATERIALS ENGINEERING, 2012, 18 (04) : 259 - 272
[4] Criteria for Evaluating Sintered Contact Materials for Power Technology.
Heitzinger, Fritz
Oismuller, Franz
Taubenkorb, Franz
Wollenek, Anton
Elektrotechnik und Maschinenbau, 1977, 94 (09): : 370 - 375
[5] Thermodynamic modelling of the erosion mechanisms of silver/metal-oxide contact materials
Weise, W
Braumann, P
Wenzl, H
METALL, 1996, 50 (7-8): : 499 - 503
[6] Silver-metal oxide type electrical contact materials by mechanical alloying
Joshi, PB
Krishnan, PS
Patel, RH
Gadgeel, VL
Ramakrishnan, P
PROCESSING AND FABRICATION OF ADVANCED MATERIALS VI, VOLS 1 & 2, 1998, : 347 - 357
[7] DEVELOPMENT OF CADMIUM-FREE SILVER METAL-OXIDE CONTACT MATERIALS
DEV, SC
BASAK, O
MOHANTY, ON
JOURNAL OF MATERIALS SCIENCE, 1993, 28 (24) : 6540 - 6544
[8] The Performance Degradation Comparison Test and Failure Mechanism of Silver Metal Oxide Contact Materials
Shang, Shang
Wang, Zhaobin
Li, Weiyan
Han, Chunyang
Wang, Zhan
PROCEEDINGS OF THE 2019 65TH IEEE HOLM CONFERENCE ON ELECTRICAL CONTACTS (ELECTRICAL CONTACTS-2019), 2019, : 335 - 343
[9] THE INFLUENCE OF BOUNCE PARAMETERS ON THE MAKE EROSION OF SILVER METAL-OXIDE CONTACT MATERIALS
HETZMANNSEDER, E
RIEDER, W
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY PART A, 1994, 17 (01): : 8 - 16
[10] Thermodynamic analysis of erosion effects of silver-based metal oxide contact materials
Weise, W
Braumann, P
Wenzl, H
ELECTRICAL CONTACTS - 1996: PROCEEDINGS OF THE FORTY-SECOND IEEE HOLM CONFERENCE ON ELECTRICAL CONTACTS: JOINT WITH THE 18TH INTERNATIONAL CONFERENCE ON ELECTRICAL CONTACTS, 1996, : 98 - 104

← 1 2 3 4 5 →