INFLUENCE OF QUENCHING TECHNIQUES ON FRICTIONAL BEHAVIOUR OF CARBON STEELS.

被引：0
|
作者：
Mokhtar, M.O.A.
Alaa, M.
Radwan, E.
机构：
来源：
Proceedings of the Society of Photo-Optical Instrumentation Engineers | 1979年
关键词：
HEAT TREATMENT - Quenching;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In an investigation of the effect of heat treatment on tribological properties of carbon steels, it has been decided to study the effect of the rate of cooling in hardening operations on the frictional behavior of steels. Various quenching techniques were investigated and relevant frictional resistance was determined. Dry and lubricated contacts were tested under different conditions of load, and also under combined rolling and sliding. Results indicate that surface hardness as influenced by quenching process with load, speed and lubricated conditions as parameters, is a prime factor in assessing the frictional behavior and higher hardness values rendering lower values for the coefficient of friction.
引用
收藏
相关论文
共 50 条
  • [1] Influence of Cooling Conditions on the Transformation Behaviour of Steels.
    Kulmburg, A.
    Korntheuer, F.
    Kaiser, E.
    Haerterei-Technische Mitteilungen, 1987, 42 (02): : 69 - 74
  • [2] CRACK GROWTH BEHAVIOUR OF FATIGUE MICROCRACKS IN LOW CARBON STEELS.
    Suh, C.M.
    Kitagawa, H.
    Fatigue and Fracture of Engineering Materials and Structures, 1987, 9 (06): : 409 - 424
  • [3] Quenching and Tempering Properties of Thermomechanically Treated Steels.
    Lippmann, Siegfried
    Preissler, Christian
    Neue Hutte, 1986, 31 (01): : 24 - 28
  • [4] Quenching and ageing of extra-soft steels.
    Bates, A
    COMPTES RENDUS HEBDOMADAIRES DES SEANCES DE L ACADEMIE DES SCIENCES, 1931, 193 : 35 - 38
  • [5] ON THE CARBURIZATION ON VACUUM OIL-QUENCHING OF STEELS.
    Ishigami, Itsuo
    Yamanaka, Kyuhiko
    Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 1976, 40 (01): : 69 - 76
  • [6] Influence of the Carbon Content on the Fatigue Strength of Hardened and Tempered Steels.
    Just, E.
    Pakrasi, S.
    Urbach, H.
    Zeitschrift fuer Werkstofftechnik/Materials Technology and Testing, 1980, 11 (09): : 312 - 318
  • [7] Influence of Phosphorus on the Intergranular Stress Corrosion Cracking of Carbon Steels.
    Krautschick, H.J.
    Bohnenkamp, K.
    Grabke, H.J.
    Werkstoffe und Korrosion, 1987, 38 (03): : 103 - 110
  • [8] Influence of AlN precipitation on continuous annealing of low carbon steels.
    Petite, MM
    Monsalve, A
    Gutierrez, I
    Urcola, JJ
    Larburu, JI
    37TH MECHANICAL WORKING AND STEEL PROCESSING CONFERENCE PROCEEDINGS, 1996, 33 : 979 - 985
  • [9] USE OF THE ″TOSOL-K″ QUENCHING FLUID FOR THE BULK QUENCHING OF STEELS.
    Astashchenko, V.I.
    Ionkina, N.P.
    Yantsen, G.I.
    Sorokin, I.E.
    Gedberg, M.G.
    Metal Science and Heat Treatment (English Translation of Metallovedenie i Termicheskaya Obrabotka, 1982, 24 (5-6): : 377 - 380
  • [10] INFLUENCE OF NICKEL OF THE FRACTURE RESISTANCE OF LOW-CARBON STEELS.
    Demygin, N.E.
    Goritskii, V.M.
    Khromov, D.P.
    Guseva, I.A.
    Vesolainen, O.Ya.
    Metal Science and Heat Treatment (English Translation of Metallovedenie i Termicheskaya Obrabotka, 1985, 27 (9-10): : 663 - 668
12345