Evaluation of mode II fracture toughness in unidirectional GFRP using four-point shear loading test method

被引：0
|
作者：
Kawada, H.
Ochi, Y.
Shimanuki, H.
Hayashi, I.
机构：
来源：
Proceedings of The Japan Congress on Materials Research | 1991年
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 50 条
  • [1] Mode-II fracture behavior evaluation for adhesively bonded pultruded GFRP/steel joint using four-point bending test
    Jiang, Zhengwen
    Fang, Zhi
    Wan, Shui
    Xie, Kaizhong
    THIN-WALLED STRUCTURES, 2021, 167
  • [2] Evaluation of in-plane mode II fracture toughness tests in unidirectional GFRP - fracture simulation using FEM
    Kawada, Hiroyuki, 1600, Nippon Zairyo Gakkai, Kyoto, Japan (44):
  • [3] Mode II fracture toughness evaluation using four point bend, end notched flexure test
    Martin, RH
    Davidson, BD
    PLASTICS RUBBER AND COMPOSITES, 1999, 28 (08) : 401 - 406
  • [4] Experimental and numerical benchmark study of mode II interlaminar fracture toughness of unidirectional GFRP laminates under shear loading using the end-notched flexure (ENF) test
    Gliszczynski, A.
    Wiacek, N.
    COMPOSITE STRUCTURES, 2021, 258
  • [5] Fracture toughness of bonds using interfacial stresses in four-point bending test
    Abdelhadi, Ousama M.
    Ladani, Leila
    Razmi, Jafar
    MECHANICS OF MATERIALS, 2011, 43 (12) : 885 - 900
  • [6] Evaluation of the accuracy of the four-point bend end-notched flexure test for mode II delamination toughness determination
    Schuecker, C
    Davidson, BD
    COMPOSITES SCIENCE AND TECHNOLOGY, 2000, 60 (11) : 2137 - 2146
  • [7] Mixed mode fracture characterization of GFRP-concrete bonded interface using four-point single leg bending test
    Liu, Qinghui
    Qiao, Pizhong
    Lu, Linjun
    ENGINEERING STRUCTURES, 2018, 171 : 647 - 657
  • [8] Mixed mode fracture characterization of GFRP-concrete bonded interface using four-point asymmetric end-notched flexure test
    Liu, Qinghui
    Qiao, Pizhong
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2017, 92 : 155 - 166
  • [9] Examination of the Mode II fracture behaviour of wood with a short crack in an asymmetric four-point bending test
    Susanti, Cicilia Maria Erna
    Nakao, Tetsuya
    Yoshihara, Hiroshi
    ENGINEERING FRACTURE MECHANICS, 2011, 78 (16) : 2775 - 2788
  • [10] New formulation for fracture toughness characterization using four-point bend specimens
    Ferreira, Denis A.
    Savioli, Rafael
    Sarzosa, Diego F. B.
    ENGINEERING FRACTURE MECHANICS, 2021, 241
12345